Floor Gratings
24Pages

{{requestButtons}}

Catalog excerpts

Floor Gratings - 1

Horizontal Gratings Pressure Locked and Electrofused Products

Open the catalog to page 1
Floor Gratings - 2

GLOSSARY OF TERMS A - pitch of bearing bars (centre-to-centre distance in mm between two bearing bars). B - pitch of transverse bars (centre-to-centre distance between two transverse bars). C - bearing bars (main structural elements, placed in parallel; the height and width influence the loading capacity). D - transverse bars (fixed at right angles to bearing bars; provide lateral restraint and help to distribute the load uniformly). E - height of bearing bar. F - width of bearing bar. Weights: kg/m22 are nominal. Standards: all gratingsaremanufactured in accordance with the dimensional...

Open the catalog to page 2
Floor Gratings - 3

Gwyneth Paltrow, Chelsea Flower Show Pressure Locked Grating by Lang+Fulton Lang+Fulton supply a comprehensive range of pressure locked and electrofused gratings to the construction industry for both vertical and horizontal applications, specializing in high quality products to satisfy the most varied requirements. With over thirty years experience, the Technical Department is able to recommend the most appropriate product for a particular project before preparing a panel layout which will make the most economical use of the selected material. Lang+Fulton work closely with the architect...

Open the catalog to page 3
Floor Gratings - 4

PRESSURE LOCKED GRATINGS Pressure locked gratings are constructed entirely from flat bars by pressing an arrangement of cross bars into notched bearing bars. The bars are further secured by a choice of flat or C-shaped edging bar, producing a custom-sized grating panel with perfectly formed intersections. This manufacturing method is extremely adaptable and the production process can promptly provide grating panels in custom sizes and to non-standard specifications of weight, aperture and performance. In spite of the high quality and pleasing aesthetic of the product, it is surprisingly...

Open the catalog to page 4
Floor Gratings - 5

TYPE-PL PRESSURE-LOCKED PRESSED TYPE-PLX PRESSURE-LOCKED CROSS-PRESSED TYPE-PLXE PRESSURE-LOCKED CROSS-PRESSED EQUAL BARS The bearing bars of a PL single pressed grating are notched before the transverse bar is inserted under pressure. The panel is then framed on all four sides with either a flat bar or a C-section bar. The PLX cross-pressed grating is made with bars of an unequal depth, both of which are notched to produce a very secure joint. This provides greater strength under stress for locations such as the turning point of a heavy vehicle. The PLXE cross-pressed grating is made from...

Open the catalog to page 5
Floor Gratings - 6

TYPE-PL PRESSURE-LOCKED PRESSED MESH

Open the catalog to page 6
Floor Gratings - 7

TYPE-PL PRESSURE-LOCKED PRESSED SAFETY GRATING to prevent the passage of a 20mm sphere (BS 4592-0 : 2006)

Open the catalog to page 7
Floor Gratings - 8

GENERAL PURPOSE MESH

Open the catalog to page 8
Floor Gratings - 9

GENERAL PURPOSE MESH

Open the catalog to page 9
Floor Gratings - 10

HEAVY DUTY - VEHICLE MESH

Open the catalog to page 10
Floor Gratings - 11

HEAVY DUTY - VEHICLE MESH

Open the catalog to page 11
Floor Gratings - 12

TYPE-PLXE PRESSURE-LOCKED CROSS-PRESSED EQUAL FLATS

Open the catalog to page 12
Floor Gratings - 14

ELECTROFUSED GRATINGS Manufacturing Process: high voltage electricity combined with pressure totally amalgamates the flat bearing bars with the transverse bars without using any unsightly welding material. The fusion of each intersection produces a material which has complete integrity, thus allowing it to be cut or shaped without compromising its overall strength. Mats are generally 6100mm long and 1000mm wide The manufacturing production lines, as well as cutting and framing processes, are all fully automated for quality control and maximum cost-efficiency. All panels are supplied framed...

Open the catalog to page 14
Floor Gratings - 15

HEEL-PROOF MESH WEIGHT GALVANIZED

Open the catalog to page 15
Floor Gratings - 16

SAFETY GRATING to prevent the passage of a 20mm sphere (BS 4592-0 : 2006) MESH WEIGHT SELF-COLOURED GENERAL PURPOSE WEIGHT

Open the catalog to page 16
Floor Gratings - 17

TYPE-EFELECTROFUSEDINDUSTRIAL MESH

Open the catalog to page 17
Floor Gratings - 19

TYPE-EFSS ELECTROFUSED SPECIAL SERRATED 13,5 mm OFF-SHORE - bearing bars are alternated with round bars for a lighter panel which retains the performance of fine mesh

Open the catalog to page 19
Floor Gratings - 20

URBAN PEDESTRIAN GRATING - BARROT A totally new concept in the design of steel grating for pedestrian areas which will also accept a standard car loading up to a maximum span of 367mm. The exceptional characteristic of the Barrot grating is achieved by incorporating bearing bars which are shaped to a reversed U-profile providing a broad surface area which is comfortable for walking on. This can be particularly relevant for applications such as domestic balconies where traditional gratings are painful to bare feet. The innovative design also includes a unique dimpled surface which provides...

Open the catalog to page 20
Floor Gratings - 21

ANTI-VERTIGO GRATING -100% VISUAL SCREENING The Anti-Vertigo system has been designed for suspended stairs and flooring where height might cause problems of privacy or dizziness. The principal feature of the grating is that the bearing bar is shaped so that transparency is obstructed from any viewing angle while retaining an open area between the bars for ventilation, drainage and the prevention of ice formation. The product is available either as a stair tread or as a flooring plank with framing bars which are shaped to slide together without any lateral fixing. A landing or platform is...

Open the catalog to page 21
Floor Gratings - 22

FIXING CLIPS FOR FLOOR GRATINGS Supplied in a galvanized finish BS EN ISO 1461 HOLDING DOWN CLIPS BEARING BAR CENTRES: 11, 15, 17mm for bottom fixing BEARING BAR CENTRES: 22, 25, 30, 34mm for top or bottom fixing BEARING OR TRANSVERSE BAR CENTRES: 11mm U-clip for top or bottom fixing ALTERNATIVE METHOD: HILTI (X-FCM-M grating disk) shot fired into flange of supporting steelwork CONNECTING CLIPS Double clamp fastener to avoid trip-up edges with the grating projections of two or more consecutive panel BEARING BAR CENTRES: 11, 15, 17mm for bottom fixing BEARING BAR CENTRES: 22, 25, 30, 34mm...

Open the catalog to page 22
Floor Gratings - 23

VERTICAL GRATINGS & STEEL LOUVRED PRODUCTS Roma-3 Bespoke Perimeter Fencing Manor Business Park, Banbury Louvred Screening North Kent Police HQ Micro-15 & Stereo-4 Roof-top Plant Housing Hilton Hotel, Tower Hill Louvre Balustrade & Sun Screen Private Housing Development Lang+Fulton offer a comprehensive range of open mesh and louvred gratings which are suitable for all types of vertical application including wall cladding, balcony balustrades, plant housing, screens, wheelie-bin stores and fencing. Custom sized panels are supplied with ancillary steelwork, providing a practical and...

Open the catalog to page 23

All LANG AND FULTON catalogs and technical brochures

  1. Louvre Fences

    17 Pages

  2. Louvres

    16 Pages