*myarchiexpo

Roots

Product catalog summary

Technical Characteristics Overview

The document provides average technical values derived from multiple production batches of ceramic or porcelain tiles, specifically the "Roots" collection including Maple and Oak variants. These values are indicative and users are advised to consult the commercial network for precise data before confirming orders, especially for projects requiring exact specifications.

Testing and Standards

Slip Resistance: Classified as R11, based on tests conducted on Roots Maple 30x120 cm samples (Batch 30-05-13).
Wear Resistance: Classified as Class 3, tested internally on the same batch in June 2013.
Chemical Resistance: Rated as resistant.
Deep Abrasion Resistance: Measured at 110 mm³, indicating good durability against deep wear.

All tests were performed on samples from the first production batch; therefore, specific values should be verified with the commercial network prior to order confirmation.

Product Formats and Dimensions

The collection includes various tile sizes and special pieces:

Standard tiles: 29.67x119.3 cm (Roots Maple and Oak), 19.71x119.3 cm, 14.73x119.3 cm, 30x120 cm, 60x120 cm, 20x120 cm, 15x120 cm.
Mosaic tiles: 5x10 cm multicolor mosaics and 15x15 cm modules (29.75x29.75 cm).
Special pieces: Rodapié (baseboards) 7.3x59.55 cm, listelos (decorative strips) 7.5x60 cm, muretto 29.75x59.55 cm.
Steps and gradone (stair treads): Sizes approximately 32.5x119.3x7 cm and 26.67x119.3 cm with R11-Class 3 rating.

Thickness

Typical tile thickness is approximately 1.16 cm (0.43 inches) for standard tiles and around 6-7 cm for steps and special pieces.

Recommendations and Limitations

Values are averages and may vary between production batches.
For projects requiring precise technical data, it is critical to verify specific product values with the commercial network before placing orders.
All technical tests referenced were conducted on initial production batches; subsequent batches may have slight variations.

Summary

The Roots collection offers a range of tile formats with good resistance to abrasion, chemicals, and slip, suitable for various applications including flooring and staircases. The technical data provided serves as a guideline, with emphasis on consulting official sources for exact specifications to ensure compliance with project requirements.

Catalog excerpts

TECHNICAL CHARACTERISTICS. CARACTERÍSTICAS TÉCNICAS ROOTS Resistance to deep abrasion. Resistenza all’ abrasione profonda. Resistencia a la abrasión profunda Resistant. Resistente * These values are the average of different production consignments. For further detail information, please check with our commercial network. / Los valores declarados son el promedio obtenido a través de ensayos de diferentes producciones. Para la obtención de una información detallada consultar a la red comercial. ** R11 - Test carried out on Roots Maple 30x120 (Batch 30-05-13). Ensayo realizado sobre el producto Roots Maple 30x120 (Lote 30-05-13) ** Clase 3 - Test carried out on Roots Maple 30x120., on June 2013. Test realized in internal laboratory. Ensayo realizado en laboratorio interno. ** TESTED ON SAMPLES FROM FIRST PRODUCTION BATCH. PLEASE CHECK SPECIFIC VALUE WITH OUR COMMERCIAL NETWORK BEFORE CONFIRMING THE ORDER. ENSAYOS REALIZADOS EN PRIMERA PRODUCCIÓN, CONSULTAR DATOS DEL PRODUCTO ESPECÍFICO ANTES DE CONFIRMAR EL PEDIDO PARA PROYECTOS QUE PRECISEN DICHOS VALORES. Roots oak 29,67x119,3 cm - Roots oak gradone 29,67x119,3 cm Resistance to chemical products Resitencia a productos químicos

Open the catalog to page 1

Open the catalog to page 2

SPECIAL PIECES.PIEZAS ESPECIALES THICKNESS. ESPESORES Roots maple 29,67x119,3 cm -19,71x119,3 cm -14,73x119,3 cm - rodapiŽ 7,3x59,55 cm gradone 120 gradone ángulo 120 Roots white 14,73x119,3 cm - maple mosaico 5x10 - m— dulo 15x15

Open the catalog to page 3

SPECIAL PIECES.PIEZAS ESPECIALES STEPS.PELDAÑOS Simple THICKNESS. ESPESORES Roots maple 29,67x119,3 cm -19,71x119,3 cm -14,73x119,3 cm - rodapié 7,3x59,55 cm gradone 120 gradone ángulo 120 R11-clase 3* * Tested on samples from first production batch. please check specific value with our commercial network before confirming the order. Ensayos realizados en primera producción, consultar datos del producto específico antes de confirmar el pedido para proyectos que precisen dichos valores. Roots white 14,73x119,3 cm - maple mosaico 5x10 - módulo 15x15

Open the catalog to page 4

Open the catalog to page 5

TECHNICAL CHARACTERISTICS. CARACTERISTICASTECNICAS MEASUREMENTS AND SURFACES APPEARANCE. STANDARD TEST METHOD DIMENSIONI EASPETTO SUPERFICIALE. MEDIDASYASPECTO SUPERFICIAL METODO DE ENSAYO E=a4- Lunghezzo e iarghezza. Longitud / anchura ILV^ Rettiffneita de/ fati. Rectitud de lados BSurfaces flatness. Planarita. Planitud PHYSICAL PROPERTIES / PROPIETA FISICHE / PROPIEDADES FISICAS Assorbimento d'acqua. Absorcion de agua rr=a Breaking strength, in N. -^z^mm r™"! Canco di rottura, en N. Fuerza de rotura, en N g^jsmn Bending resistance. \—ii Resistenza alia flessione. Resistencia a la flexion_ BResistance...

Open the catalog to page 6