Eco 3.4 P
3Pages

Catalog excerpts

Pellet jet burner with one stage operation or modulating on 5 output steps. Supplied with feeding motor, worm feeder assembly, connection pipes. Pellet holding tank as an optional, capacity 195 lts. Burner ﬁ rst ignition through electric heater. Heat request occurs through: - built-in timer or external (room or buffer tank) thermostat - built-in timer together with external (room or buffer tank) thermostat - programmable thermostat only (burner timer excluded). Solid cast aluminium frame and high-temperatures resistant stainless steel head. Safety thermostat for ﬂ ue gas back-ﬂ ow, set to 85° C. Practical pre-cabled wiring on the right of the casing, for connection to burner and system ancillaries. Certiﬁ ed according to DIN EN 15270. Control panel The onboard electronic interface facilitates adjustment by the installer as regards fan’s operation, screw activation, pellet loading, heating slope and output, self-diagnostic and other functions. The user can set the internal timer according to a weekly plan, wit

Open the catalog to page 1

events per day. Different combinations of pre-set weekly programs are also available for direct setting or further customisation. Burner’s switch on/off can of course occur fully manually, in case of particular or unexpected requirements of the user. Eco 3.4 P is supplied as a kit, in 2 cartons. One carton with: 1 feeding motor 2 worm feeder assembly 3 PVC ﬂ exible feeding pipe One carton with: 4 burner unit

Open the catalog to page 2

Output max_kW _min_kW Flow rate max_kg/h _min_kg/h _Electrical protection rating_IP _Power voltage/frequency_V/Hz _Electrical power imput_W _Igniter electrical power_W _Empty weight_kg Pellet dimensions 0/length mm

Open the catalog to page 3