SAINTE 03
4Pages

ribbon length: weight: certifications: warranty: SAINTE 03 Sainte is a collection about the forces that anchor us, a suspension light in dialogue with gravity. Reimagining the rectangle in layered, colourful glass, Sainte offers an elegant floating mass supported by robust nylon ribbons. Powered by a flat wire embedded in the nylon, these anchors carry a casual, contemporary spirit: an everyday material flirting with its graceful, minimalist centre. The form can suspend from any height, at a specified angle, and in multiples, offering infinite architectures and possibilities. As a collection, it presents a dance of contrasting materials and an equilibrium of opposing powers. type: suspension construction: aluminum polished light block, glass anchor system and ceiling anchors polyester laminated glass (one side) nylon ribbon PMMA frosted diffuser specifications: source: LED array, integrated power consumption: 7.9W colour temperature 2700K, 3000K, dim to warm. see order guide lumen output: 2700K - 359lm colour rendering index: >90 CRI colour consistency: 3 SDCM expected lifetime: >50 000h control: 120-277V: On/Off, 0-10V, Phase Dimming (120V only) 220-240V: On/Off, Phase Dimming, DALI refer to our recommended list of dimmer models 10’ / 305 cm each side, width: 1.5” / 3.8 cm 18.3 lb / 8.2 kg RoHS A IP20 2 years ’dimensions are approximate and may vary slightly

ORDER GUIDE: SKU COLLECTION MODEL STE sainte 03 STE 03 GLASS BODY SIDE A BK black GY grey EC extra clear GN green BZ bronze FG frosted grey FC frosted extra clear CC* custom colour BK GLASS BODY SIDE B BK black GY grey EC extra clear GN green BZ bronze FG frosted grey FC frosted extra clear CC* custom colour BK NYLON RIBBON CANOPY BK black BK black COLOUR TEMPERATURE (CCT) CONTROL WL warm light (2700K) NL neutral light (3000K) D27 dim to warm (2700K to 2200K) D30 dim to warm (3000K to 2200K) CCT Other CCT available upon request* ZT 0-10V dimming (120V only) PH phase dimming DA DALI...

Phase cut dimming (leading edge or trailing edge**) Max level Min level Cooper/Eaton Cooper/Eaton Cooper/Eaton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Lutron Dimming Protocol Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut TESTED DIMMER COMPATIBILITY LIST - 230V* Phase cut dimming (leading edge or trailing edge**) Busch-Jaeger CLIPSAL Diginet Diginet ELKO Finder Gira Dimming Protocol Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Phase Cut Some dimmers require a minimum load, check...

NOTES: – must be installed by an electrician – LED may only be changed by Lambert & Fils or other authorized personnel – not protected against liquids (refer to IP20) – additional charges for modifications or for special orders – please refer to maintenance sheet on website for cleaning instructions