CE SafeGard GP PDS
2Pages

Serged (stitched) overlocked seams Entry level SMMS based hazardous dust (Type 5) and liquid aerosol (Type 6) protective coverall with high comfort level. • • • • 45gsm SMMS fabric with high breathability and superior level of comfort. Air permeability over 10 times that of flash-spun polyethylene or microporous film laminates. Air permeability negates generation of the bellows effect which on low-breathable fabrics encourage penetration of particles through seams and closures. Double-sided tape to zipper cover to allow safe and secure seal over the zip. Lakeland “Super-B” ergonomic styling – unique combination of three design elements to optimise fit, durability and freedom of movement. Three piece hood for rounder head shape and greater comfort. Inset sleeves – torso shaped to body to mazimise freedom of movement and negate the need for thumbloops. Two piece crotch gusset – enhances freedom of movement and reduced crotch splitting. Physical Properties MicroMax® NS /TS Abrasion Resistance Flex Cracking Trapezoidal Tear Tensile Strength Puncture Resistance Anti-static Seam Strength (Surface Resistance) Chemical Repellency and Penetration EN 6530 MicroMax® NS/TS SafeGard® GP SafeGard® 76 Flashspun PE Coverall with elasticated hood, cuffs, waist & ankles. Coverall with elasticated hood, cuffs with thumb loops, waist & ankles. Coverall with elasticated hood, cuffs, waist and attached socks. Coverall with elasticated hood, cuffs with thumb loops, waist and attached socks. Sizes: SM - 3XL Breathability - measured by air permeability and moisture vapour transmission rate (MVTR) MicroMax® NS/TS Air permeability cubic feet/minute (cfm) Cotton T-shirt Infectious Agent / Biological Hazard Protection Tested according to EN 14126. This consists of four different tests to assess protection against different forms of classification. Note these tests are on fabric only. We would always recommend a garment with sealed seams such as MicroMax® TS for protection against infectious agent hazards. Test Description Lab coat with two hip pockets. 4 stud fastening. Lab coat with two hip pockets. Zip fastening. Rear entry gown with elasticated sleeves and ties. Standard overshoes with elasticated tops 50cm sleeves with elasticated ends. Overshoes with elasticated tops, anti-slip soles. Style code 020 Cape hood with elasticated face opening. Overshoes with elasticated tops, anti-static soles. Protection against blood and body fluids Protection against biologically contaminated aerosols Protection against dry microbial contact Protection against mechanical contact with substances EN 14126:2003 containing contaminated liquids Annex A Not all styles are available from European stock in this fabric. Please contact our sales office for information on stock items. Lakeland Industries Europe Limited MicroMax® NS/TS

Protect Your People Clothing For Protection against Type 5 and 6 Hazards Essential Guide to Garment Selection There are many different brands of Type 5 & 6 coveralls in the market - yet there are only three essential types of fabrics used to make them. So which fabric is the best choice? That depends on the application and the balance to be achieved between protection, comfort and durability. protection against hazardous dry particles Type 5- Hazardous Dry Particles - Spray cabin filled with dust Subject performs exercise on treadmill 3 particle counters inside the suit Particle “Inward...