Trifold2
1Pages

{{requestButtons}}

Catalog excerpts

Trifold2 - 1

Lafarge Rapid Coat® All-Purpose Joint Compound Lafarge Rapid Coat • Ideal for use in all phases of gypsum board finishing: taping, finishing, skim coating, texturing, filling corner bead and trim, and concealing nail • Makes an excellent bonding agent for laminating • Premixed and ready to use right out of the container. • Quick-drying (in as little as 4 hours). • Sands easily. • Excellent coverage and adhesion. Rapid Coat covers as well as or better than ordinary joint compound. • Saves time and money. The two-step system gets the job completed faster with minimized labor. Application of Lafarge Rapid Coat* Joint Compound in 2 Steps While Lafarge Rapid Coat gives excellent coverage with the traditional three-coat method (tape, fill, finish), a two-step application method is recommended to obtain the same great results in less time. Apply Rapid Coat generously with a steel finishing Press paper joint tape firmly into compound to create a good bond and remove excess material. Apply "fill coat" immediately with a trowel or joint knife to hide the tape. Remove excess material by feathering the center and edges of the joint. Apply Rapid Coat (up to 1/4 in. thick without cracking) to fill corner beads and nail/screw dimples. Apply a finish coat when Step One application is thoroughly dry (approximately Apply finish coat to fill corner beads and nail/screw dimples. Sanding is not required between applications unless the work is rough. If it is necessary, do a light sanding within 48 hours (180 to 220 sandpaper recommended). For best results, apply a good quality gypsum board primer before painting or wallpapering. Rapid Coat0 is a registered trademark ol Lafarge North America Inc. in the United States. "Maintain room temperature between 68-77°F (20-25°C) and provide adequate ventilation for proper drying and best results.

Open the catalog to page 1

All HOLCIM catalogs and technical brochures

  1. gcal

    2 Pages

  2. Stabilia

    2 Pages

  3. Pavamax

    2 Pages

  4. CHRONOLIA

    2 Pages

  5. hydromedia

    2 Pages

  6. Durawhisper

    2 Pages

  7. DURAWAY

    2 Pages

  8. DuraTough®

    9 Pages

  9. DURATINT™

    2 Pages

  10. DURACYCLE™

    2 Pages

  11. DURACLIME™

    2 Pages

  12. EXTENSIA

    2 Pages

  13. Artevia

    2 Pages

  14. PozzMod Plus

    2 Pages

  15. BlockSet

    2 Pages

  16. Tercem 3000

    6 Pages

  17. SF Cement

    6 Pages

  18. Terracem

    4 Pages

  19. MaxCem

    2 Pages

  20. MOLD DEFENSE

    2 Pages

  21. Brochure

    4 Pages

  22. GA-214-10e

    4 Pages

Archived catalogs