Insulation panels + ceramic brick slips

CONTENT WHAT´S TERMOKLINKER WHY TERMOKLINKER INSULATION & COMFORT INSTALLATION BEFORE & AFTER TERMOKLINKER • Constructive sections TECHNICAL CHARACTERISTICS TERMOKLINKER COLLECTION

WHAT´S TERMOKLINKER La Paloma Cerámicas develops Termoklinker: a combined system by insulation panels of extruded polystyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. Improved the acoustic insulation. High insulation performance in both cold and warm seasons. Eco-efficient construction solution. It contributes to reduce the energy consumption in houses. Improved aesthetics and functionality of the façade

WHY TERMOKLINKER An integrated system made of insulation panels + brick slips to improve comfort through the following measures; Natural raw materials on clay Optimal insulation in cold seasons Optimal insulation in warm seasons Increased energy savings Interperie and vapor formation protection Improved sound insulation Siding inert Fast and easy installation Improves comfort and wellbeing in the house Subjected to standardized quality control Aesthetic integrated into the environment

We spend 80% of our time indoors. But, are we allways aware of our surroundings? The mission of La Paloma Cerámicas is to develop building products that meet both man needs, as those of nature. Our products are derived from renewable raw materials and potentially harmful additives free.

INSULATION & COMFORT Energy savings Acoustic and thermal efficiency of a building, starts in the façade: it is one of the main points to consider: its the area in which more heat or cold transmission occurs and the main barrier against external noise. A proper design of this structure will therefore be fundamental in achieving a building whose energy demand for heating and air conditioning is as small as possible, and also allows users to provide adequate indoor comfort. Heat source Cold source +20º insulation wall diagram Termoklinker without insulation wall diagram Compensation effect of thermal...

CLIMATE CHARACTERISTICS The peninsular climate is fundamentally maritime and warm. Although, as going north, it gradually turns cold. Actually, there is a considerable difference in energy requirements if houses are located in the north or in the south of Spain. Generally speaking, in the north, the heating is the most important factor for builders, whereas in the south is the need of cooling. There are also different scenarios to which houses shall adapt like windy locations, in close proximity to the sea, rivers etc. These possibilities should be considered when designing a highly energy efficient...

INSTALLATION Alignement of Termoklinker panels Panels are placed side by side, making a uniform skin in the façade. Drilling the substrate Panels setting in the wall was studied to withstand the maximum wind suction effort Required by the technical code. Sealant between panels Adhering bonding brick slips The junction between panels made with polyurethane foam to prevent leaks. The coating is completed by brick slips insertion between panels, using flexible mortar.

Fixing the panels Panels are mechanically attached by studs and stainless steel screws. Mortar jointing Jointing is made with a rubber trowel and cement mortar. Finally, its cleaned with sponge and water.

BEFORE & AFTER TERMOKLINKER Before Termoklinker An initial façade analysis, indicates the type and number of pieces that the work requires.

After Termoklinker The aesthetic of the façade is the same as a another one traditional coated. The main difference is a higher efficiency.

COMPONENTS • Constructive sections Termoklinker Components Klinker brick slips Fixation washer Grip mortar Extruded polystyrene Standard panel dimensions 48 mm Thickness as per requested insulation

Lintel detail Sealed with polyurethane foam Mechanic fixation

COMPONENTS • Constructive sections Jamb detail Sealed with polyurethane foam Klinker brick slips

Start detail Mechanic fixation Start profile

Exterior side Interior side (48/68) Width Water absorption <6% weight Frost resistance No damage

The shall be analysed according to site conditions Monocomponent sealant based on silicon rubber with neutral crosslinking Special flexible mortar for jointing (1) All values refer to Termoklinker panels with 50 mm. of XPS insulation. (2) Weight corresponding to the Termoklinker system fully assembled, including jointing. Thickness as per insulation required. (3) Value for Termoklinker fully assembled (Hygrothermal behaviour with 50 mm. of XPS insulation). (4) Maximum wind load according to “Documento Basico SE-AE Acciones en la Edificacion del CTE”. This load has been used for estimating the...

La Paloma Cerámicas gives the opportunity to manufacture different colors as per client requirements.

Projects, as in life, will have the colors we give them. It is important analyze carefully before deciding the right tone we want to use in our project. La Paloma Cerámicas helps you to design every space with unlimited and customized tones so they become unique. Our client has the paintbrush and we have the colors, we help him to create his project so he can enjoy it.

Cmno. del Ferrocarril s/n 45290 Pantoja (Toledo) +34 925 55 46 00