Multitec 200 / 250

Product catalog summary

Overview: The Multitec 200/250 is a high-pressure pump designed in a ring-section configuration, suitable for applications such as water supply, drinking water supply, and irrigation. It is equipped with advanced features like PumpMeter and PumpDrive R for enhanced performance and efficiency.

Design and Construction: The pump features a special suction impeller for optimal performance under poor suction conditions and an axial thrust balancing mechanism using a balancing drum for extended service life. The casing and diffuser wear rings provide increased protection against wear, and the casings are made from nodular cast iron.

Efficiency and Cost-Effectiveness: The pump offers energy savings of up to 60% when equipped with PumpDrive R and PumpMeter. It has an optimized hydraulic design with impellers trimmed to the duty point to ensure high system efficiency.

Flexibility and Serviceability: The suction and discharge nozzles can be rotated in 90° increments for on-site adjustments. The design allows for easy dismantling of bearings and shaft seals without removing hydraulic components, thanks to separate seal chambers and bearing housings.

Technical Specifications: The pump supports a flow rate of up to 1500 m3/h (6604 US gpm), a head of up to 400 m (1312 ft), and a discharge pressure of up to 40 bar. It operates with fluid temperatures up to 60°C (140°F) and is compatible with 50 and 60 Hz frequencies.

Materials and Construction: The pump's casing is made of nodular cast iron, the impeller is bronze, the diffuser is either grey cast iron or bronze, and the shaft is stainless steel. Flanges are available in DIN or drilled to ASME standards.

Design Variants: The pump is available in horizontal long-coupled designs with radial nozzles and rolling element bearings on both ends, with drive options on either the suction or discharge side.

Catalog excerpts

Our technology. Your success. Pumps Valves Service n Multitec 200 / 250 – High-pressure Pump in Ring-section Design Multitec 200 / 250 with PumpMeter Multitec 200 / 250 with PumpMeter and PumpDrive R Water supply Drinking water supply (ACS) Irrigation More information: www.ksb.c

Open the catalog to page 1

Multitec DN 200 / 250 – High-pressure Pump in Ring-section Design 3 1 pecial suction impeller designed for good performance S and smooth running even under poor suction conditions. 2 Axial thrust balancing ensured by balancing drum for a long service life. 3 Casing and diffuser wear rings for increased protection against wear. 4 Casings made of nodular cast iron produced at European 6 Suction and discharge nozzles can be turned in steps of Service-friendly Easy dismantling of bearing and shaft seal without the need to remove hydraulic components thanks to: 7 Bearing and shaft sleeves 8 Separate...

Open the catalog to page 2

Multitec 200 / 250

Multitec 200 / 250

Catalog excerpts

All KSB catalogs and technical brochures