Applying a minimum of 3 cm of TERMO TYNK 951 to a typical 50 cm thick brick tenement wall can reduce heat loss by approximately 25-30%. A 3 cm layer of THERMO PLASTER 951 reduces the heat transfer coefficient (U-value) of a typical 50 cm thick brick wall by approx. 30% (excluding interior plaster layers). A 6 cm layer reduces the U-value by approx. 50% (excluding interior plaster layers). THERMO PLASTER 951 is not a final coat and must be finished with RENO REPAIR FILLER 952 - a fibre-reinforced finishing compound based on white cement and special aggregate. This finishing layer can be applied to achieve either an exposed aggregate effect or a smooth surface, making it highly versatile and ideal for renovating cracked cement-lime renders. THERMO PLASTER 951 is the perfect solution for renovating historic buildings under heritage protection, where thermal protection requires a different approach. It can replace standard cement-lime or even renovation plasters (when salt and moisture levels are minimal) on parts of the fagade.

TERMO TYNK 951 system products: Packaging: Up to 12 months from production date in dry conditions, in undamaged original packaging. Factory-prepared dry plaster mortar composed of mineral binders, mineral fillers (including lightweight perlite), and additives improving performance properties, additionally hydrophobised. After mixing with water, it forms a homogeneous plaster mass with very high adhesion to the substrate. Once cured, it is water- and frost-resistant. Suitable for both exterior and interior applications, including rooms with elevated relative humidity. Can be applied manually or...