FAÇADE BOARD www.kreisel.pl/en

COLOUR RANGE: SYSTEM COMPONENTS Light Walnut READY-TO-USE TILE ADHESIVE 111 for installation Dark Walnut ACRYLIC LAZUR 1003 for finishing

The flexible board should be fixed to a well-cured and dry reinforced layer. The flexible board is bonded using READY-MIXED TILE ADHESIVE 111. This is the best solution, as this adhesive is free from calcium compounds and, under possible wetting and drying conditions, does not cause salt efflorescence. The adhesive should be applied using a notched trowel with a maximum notch size of 6 mm. The flexible board should be placed onto the applied adhesive and pressed firmly so that the adhesive fully covers the underside of the panel. staggered pattern Installation works should be carried out in dry...

The flexible panel imitating a wooden board can be easily cut to any required length. This can be done using a utility knife or scissors. After a minimum of 48 hours from bonding, the board should be coated with Acrylic Lazur 1003 in the selected colour, applied with a brush along the grain. A single coat is sufficient. If the decorative effect requires it, the board may be coated twice with the glaze. To achieve a rustic effect, gently wipe the surface with a dry, clean sponge after applying the glaze. The final effect becomes visible afte