Protective Wallcoverings Koroseal Wall Protection Systems Korogard® Decorative Beadboard Protective Wallcoverings Korogard® Decorative Beadboard Pattern in Protective Wallcoverings are engineered with quality in every detail. Korogard Beadboard Wallcoverings are manufactured using a rigid Korogard or Korowood™ substrate sheet designed for use in high-traffic areas that are subject to abuse from impact, gouges, and scratches. Korogard extends the life cycle of walls and reduces maintenance costs from repairs and repetitive labor like painting. Korogard Beadboard Wallcoverings are available in .040" (1.02mm) and .060" (1.52mm) standard thicknesses. All standard colors and DECORATIVE BEADBOARD PATTERN ACCESSORY ITEMS Korowood patterns are available with Korogard beadboard M082 J-Molding [0.028" (0.71mm)-0.080" (2.03mm)] wallcoverings and custom colors can be created to your specification. JC12 Inside Corner Molding [0.028" (0.71mm)-0.080"(2.03mm)] Aluminum Inside Corner Molding [0.028" (0.71mm) 0.080" (2.03mm)] Outside Corner Molding [0.028" (0.71mm)-0.080"(2.03mm)] Aluminum Outside Corner Molding [0.028" (0.71mm)0.080" (2.03mm)] Color-Matched Caulk Heavy Pressure Roller Each Korogard beadboard sheet is manufactured with color throughout the entire thickness of the sheet so that minor scratches or dents will not be visible. Korogard Beadboard Protective Wallcoverings are designed to coordinate and complement all Korogard Wall Protection Products and Koroseal® Wallcoverings. Moldings and caulk are available to ensure accurate color matching and a finished look. Korogard is chemical- and stain-resistant to prevent discoloration and surface damage from strong cleansing agents. Korogard Protective Wallcoverings are fire rated for Surface Burning Characteristics as classified by Underwriters Laboratories, Inc. and meet national building code standards. For more information on Korogard Protective Wallcoverings, contact your local Korogard distributor or call 800-628-0449.

Wallcoverings Product Guide Specification SECTION 10 26 00 WALLCOVERING PART 1 GENERAL 1.01 SECTION INCLUDES Decorative Beadboard Pattern in Protective Wallcovering. 1.02 SUBMITTALS A. Comply with requirements of Section 01 33 00—Submittals. B. Product Data: Submit Manufacturer’s product data including installation instructions. C. Samples: Submit 7" (177.8mm) x 9" (228.6mm) sample of each type, thickness, pattern, and texture to be installed for Architect’s approval. D. Certification: Submit manufacturer’s certification indicating Protective Wallcovering meets specified requirements. E. Maintenance...