RADIK steel panel radiators

The RADIK 06/2019 catalogue replaces all previous issues. The new plant KORADO, a.s. is with its technological equipment and organizational structure the most modern factory for the production of radiators in Europe. Its modern and sophisticated set-up in the area of 30 000 m 2 enables further increases of production capacity whenever needed. The choice of all technology was driven by the maximum effort to ensure environment protection inside the factory as well as in its surroundings. KORADO, a.s. is the holder of the ISO 9001 quality certificate. Bří Hubálků 869, 560 02 Česká Třebová, C

RADIK KLASIK - with right or left side connection (see page 18) RADIK KLASIK - R - for a quick replacement of an old sectional radiator (see page 19) RADIK KLASIK - Z - zinc-coated radiator - with side connection (see page 22) RADIK VK - with bottom right connection (see page 23) The company reserves the right to make technical changes.

RADIK VK - Z - zinc-coated radiator - with bottom right connection (see page 24) RADIK VKU - enables both right and left bottom connection (see page 25) RADIK VKL - with bottom left connection (see page 26) RADIK MATERNELLE VK - for nursery schools - with bottom right connection (see page 27) The company reserves the right to make technical changes.

RADIK MATERNELLE VKL - for nursery schools - with bottom left connection (see page 28) RADIK PLAN KLASIK - with a flat front panel and side connection (see page 29) RADIK LINE KLASIK - with a flat front panel with fine horizontal grooves (see page 29) RADIK PLAN KLASIK – R - with flat front panel - for replacement of a sectional radiator (see page 30) The company reserves the right to make technical changes.

RADIK LINE KLASIK – R - with flat front panel with fine horizontal grooves - for replacement of a sectional radiator (see page 30) RADIK PLAN VK - with a flat front panel and bottom right connection - with bottom right connection (see page 31) RADIK LINE VK - with a flat front panel with fine horizontal grooves - with bottom right connection (see page 31) RADIK PLAN VKL - with a flat front panel and bottom right connection - with bottom left connection (see page 32) The company reserves the right to make technical chang

RADIK LINE VKL - with a flat front panel with fine horizontal grooves (see page 32) RADIK PLAN VERTIKAL - M - with bottom middle connection and flat front panel - with bottom middle connection (see page 33) RADIK LINE VERTIKAL - M - with bottom middle connection and grooved front panel - with bottom middle connection (see page 34) RADIK HYGIENE - enables right or left side connection (see page 36) The company reserves the right to make technical changes.

RADIK HYGIENE VK - with bottom right connection (see page 37) RADIK CLEAN - enables right or left bottom connection (see page 38) RADIK CLEAN VK - with bottom right connection (see page 39) RADIK RADIK STEEL PANEL RADIATORS IN HEIGHT 200 mm - for rooms with low window sills (see page 40) The company reserves the right to make technical changes.

• made to last • extended warranty • suitable for all energy sources • suitable for low temperature heating systems • high resistance to excess pressure • excellent finish • multifunction packaging • low water volume • low weight • ISO 9001 guarantee of quality of products and services • recyclable The company reserves the right to make technical changes.

Description RADIK are steel panel radiators with a natural air convection around their heat-transfer surface. They are produced in single, double or triple panel version. The basic heat-transfer surface is created by a profiled panel with horizontally and vertically aligned channels. For an increase of heat output there is an additional convector fin welded on the inside of the panel of some of the radiator types. The panel is made from two moulded steel shells which are spot-welded in vertical profiles and seam-welded on all four sides of the panel. A cold-rolled low-carbon content steel is...

Technical data Finish The technology used guarantees the achievement of three basic goals: • long-term corrosion resistance and mechanical durability • fine-quality finish • hygienic surface The surface finish is done in three basic phases: 1) Preparation of the steel surface - includes degreasing, phos-phating, and rinsing in three stages. 2) Putting on the first layer of paint using the cataphoretic method (KTL). The layer of paint is evenly spread over the whole radiator. The KTL paint gains its final anticorrosion, adhesive, and mechanical and chemical characteristics in a drying oven. This...

GENERAL INFORMATION Basic Equipment All RADIK steel panel radiators except the model RADIK VKU and all radiators in height 200 mm have two upper and lower hangers welded on the back. Radiators with length 1800 mm and longer have six welded hangers. All steel panel radiators are delivered in uniform packaging, which consists of: All radiators are equipped with an air vent and a respective number of blanking plugs. All connections of RADIK steel panel radiators have the same diameter with a G 1/2 internal thread. corrugated cardboard plastic reinforcing corner covers polyethylene shrinking foil...

Guidelines for mounting Basic guidelines for the installation of steel panel radiators: • centre below a window • centre of radiator and of window at the same place • air movement around the radiator should not be restricted We offer an assortment of brackets for RADIK steel panel radiators. That assortment is shown in the KORAMONT catalogue and covers most installers needs and all main construction materials. Its construction allows mounting of the radiator with minimum damage of its packaging (at the place of mounting and connection of necessary parts) and the packaging can be removed after...

on page 23 on page 24 on page 25 on page 26 on page 27 on page 28 on page 31 on page 32 on page 31 on page 32 on page 37 on page 39 Description Models in VENTIL KOMPAKT version are equipped with a built-in distribution pipeline and valve. This construction allows connection of the radiator from the bottom to the heating system. The axial distance of the bottom outlet is always 50 mm and has a G 1/2" internal thread. Its construction is intended for modern heating systems with pressurized circulation of the heating medium and horizontal piping below the radiator in the floor, in the wall, or on...