Group: Korado
Catalog excerpts
Steel panel radiators
Open the catalog to page 1A quick access to most recent information Read us in your mobile phone You can view our oer also in your mobile phone. You just need to scan the QR code with the QR reader on your mobile phone. You will then be able to view the complete range of our RADIK products on your mobile phone, including the overview of models, technical parameters and photo gallery. The new plant KORADO is the most modern factory for the production of radiators in Europe thanks to its up-to date production facility, technology and organization. Its modern and sophisticated organization in the area of 30 000 m2...
Open the catalog to page 2PLAN KLASIK
Open the catalog to page 5STEEL PANEL RADIATORS IN HEIGHT 200 MM
Open the catalog to page 8• made to last • • extended warranty • • suitable for heating with renewable energy sources • • suitable for low temperature heating systems • • suitable for natural gas heating • • suitable for wood, coal, briquette and wood pellets heating • • high resistance to excess pressure • • excellent finish • • multifunction packaging • • low water content • • low weight • • ISO 9001:2008 guarantee of quality of products and services •
Open the catalog to page 9GENERAL INFORMATION Description RADIK are steel panel radiators with a natural air convection around their heat-transfer surface. They are produced in single, double or triple panel version. The basic heat-transfer surface is created by a profiled panel with horizontally and vertically aligned channels. For an increase of heat output there is an additional convector fin welded on the inside of the panel of some of the radiator types. The panel is made from two moulded steel shells which are spot-welded in vertical profiles and seam-welded on all four sides of the panel. A cold-rolled...
Open the catalog to page 10GENERAL INFORMATION Technical data Finish The technology used guarantees the achievement of three basic goals: • long-term corrosion resistance and mechanical durability • fine-quality finish • hygienic surface The surface finish is done in three basic phases: 1) Preparation of the steel surface – includes degreasing, phosphating, and rinsing in three stages. 2) Putting on the first layer of paint using the cataphoresic method (KTL). The layer of paint is evenly spread over the whole radiator. The KTL paint gains its final anticorrosion, adhesive, and mechanical and chemical characteristics...
Open the catalog to page 11GENERAL INFORMATION Basic Equipment All RADIK steel panel radiators except the model RADIK VKU and all radiators in height 200 mm have two upper and lower hangers welded on the back. Radiators with length 1800 mm and longer have six welded hangers. All radiators are equipped with an air vent and a respective number of blanking plugs. All connections of RADIK steel panel radiators have the same diameter with a G 1/2 internal thread. Except the types 10 and the models RADIK HYGIENE, RADIK HYGIENE VK, RADIK CLEAN, RADIK CLEAN VK all other models are delivered with end panels and top grills...
Open the catalog to page 12GENERAL INFORMATION Guidelines for fitting Multifunctional package Basic guidelines for the installation of steel panel radiators: • centre below a window • centre of radiator and of window at the same place • air movement around the radiator should not be restricted We offer an assortment of brackets for RADIK steel panel radiators. That assortment is shown in the KORAMONT catalogue and covers most installers needs and all main construction materials. Its construction allows fitting of the radiator with minimum damage of its packaging (at the place of fitting and connection of necessary...
Open the catalog to page 13GENERAL INFORMATION - VENTIL KOMPAKT Models Description RADIK VK, RADIK VKU, RADIK VKL, RADIK COMBI VK, RADIK VKM models are VENTIL KOMPAKT versions of steel panel radiators with a built-in internal connecting circuit and valve. This construction allows connection of the radiator from the bottom to the heating system. The axial distance of the bottom outlet is always 50 mm and has a G 1/2 internal thread. Its construction is intended for modern heating systems with pressurized circulation of the heating medium and horizontal piping below the radiator in the oor, in the wall, or on the wall...
Open the catalog to page 14GENERAL INFORMATION - VENTIL KOMPAKT Thermostatic heads To set and regulate the temperature in a room it is necessary to t a thermostatic head on the VENTIL KOMPAKT radiators. For direct tting only thermostatic heads can be used with connecting thread M 30 x 1.5. Below is an overview of the basic types made by different manufactures for the Czech market. For information about other makes, please, contact the manufacturer or their representative on the market concerned. 1. Danfoss - Type RAE-K 5034, 013G5034 2. Danfoss - Type RAX-K 013G6080 13. Honeywell - Type Thera 4 14. Honeywell - Type...
Open the catalog to page 15GENERAL INFORMATION - VENTIL KOMPAKT Twin-pipe heating system When installing VENTIL KOMPAKT steel panel radiators, it is necessary to preset the valve to such a position that the radiator will perform as calculated. It is the responsibility of the installer to make sure this has been done. At the factory the valve is preset at level 6 and after rinsing and before the start of the heating test it must be set by a special key to the desired position. Example of calculation Solution to: Given: level of presetting heat output cooling of water pressure loss of radiator with valve heat capacity...
Open the catalog to page 16GENERAL INFORMATION - VENTIL KOMPAKT Twin-pipe heating system 2 Loss of pressure Δp [mbar] Level of valve presetting Ventil Kompakt Radiators Valve with presetting at six levels and with thermostatic head without connecting ttings The company reserves the right to make technical changes. GENERAL INFORMATION - VENTIL KOMPAKT
Open the catalog to page 17GENERAL INFORMATION - VENTIL KOMPAKT One-pipe heating system When using VENTIL KOMPAKT steel panel radiators, it is necessary for the valve to be preset at level 6. To set the required water flow for the radiator, we recommend using a compact connection fitting that has a fixed or an adjustable setting to allow the water into the radiator. As an example we use the VEKOLUX compact fitting from the company HEIMEIER. Example of calculation Solution to: pressure loss when using a radiator with valve including Vekolux fitting heat output of the circuit cooling of water share of radiator heat...
Open the catalog to page 18All KORADO catalogs and technical brochures
-
KORATHERM
52 Pages
-
KORAMONT
28 Pages
-
RADIK - steel panel radiators
92 Pages
-
CONVECTORS
81 Pages
-
RADIK
74 Pages
-
VENTILATION UNITS
16 Pages
-
KORATHERM
44 Pages
-
KORALUX towel rail radiators
52 Pages
-
Convectors
100 Pages
-
Catalogue KORATHERM®
36 Pages
-
Catalogue KORALUX®
48 Pages