Catalog excerpts
CONTENTS DF-48 spherical diffuser 2 Selection and correction charts 5
Open the catalog to page 2DF-48 spherical diffuser Description The DF-48 long-throw, spherical diffuser in its standard version is manufactured entirely of anodised aluminium with a natural finish. By special order, the diffuser can be painted in any RAL colour. The diffuser has a volume control damper at the outlet. Application The DF-48 diffusers allow long throws with an acceptable noise level. The diffuser releases an occasional air jet with a throw of over 30 metres. They can be used for spot cooling and are especially appropriate for sport centres, industrial warehouses, clean rooms, recording studios,...
Open the catalog to page 3Dimensions of plenum boxes for Dimensions of plates with diffuser connection to round duct assemblies
Open the catalog to page 4Notes - This selection table is based on laboratory tests as per ISO 5219 (UNE 100.710) and ISO 5135 and 3741 standards. - At is equal to 0°C (isothermal air). - The behaviour of the air jet with different At is shown in the following charts. Symbols Q = Air flow VK = Effective velocity Ak = Effective area APt = Total pressure drop LwA = Sound power X0,3 - X0,5 - X1i0 = Throw for a terminal air velocity of 0.3, 0.5 and 1.0 m/s, respectively.
Open the catalog to page 5DF-48 DF-48 model Selection charts DF-48-1.- Maximum vertical penetration.
Open the catalog to page 6DF-48 model DF-48-2.- Velocity of the air jet for the throw.
Open the catalog to page 7DF-48 model DF-48-3.1.- Vertical deviation of the air jet (non-isothermal jets).
Open the catalog to page 8DF-48 model DF-48-3.2.- Vertical deviation of the air jet (non-isothermal jets).
Open the catalog to page 9DF-48 model DF-48-3.3.- Vertical deviation of the air jet (non-isothermal jets).
Open the catalog to page 10DF-48 model DF-48-3.4.- Vertical deviation of the air jet (non-isothermal jets).
Open the catalog to page 11DF-48 model DF-48-3.4.- Vertical deviation of the air jet (non-isothermal jets).
Open the catalog to page 12DF-48 model DF-48-3.5.- Vertical deviation of air jet (non-isothermal jets).
Open the catalog to page 13DF-48 model DF-48-3.6.- Vertical deviation of the air jet (non-isothermal jets).
Open the catalog to page 14DF-48 model DF-48-4.- Ratio between air flow velocities. DF-48-5.- Ratio between temperature differences.
Open the catalog to page 15DF-48 DF-48 model DF-48-6.- Induction rate. DF-48-7.- Pressure drop and sound power level.
Open the catalog to page 16DF-48 Symbols Common symbols used in all tables and charts in the catalogue. Distance between the equipment to the impact point of the jets (with another jet or wall) under isothermal conditions. Supply angle. Horizontal distance from the equipment to the impact point of the jets (with another jet or wall). Throw of the air jet. Deviation of the air jet caused by a temperature difference between the supply and ambient air. Installation height of the equipment. Height of occupied area. Height from the impact point of the jets (with another jet or wall) under isothermal conditions with...
Open the catalog to page 17THIS CATALOGUE IS INTELLECTUAL PROPERTY. Reproduction, either partial or total, by any means, including electronic, is prohibited without prior written authorisation from KOOLAIR, S.A. CEN-DF-48-0815-00
Open the catalog to page 18KOOLAIR, S.A. Calle Urano, 26 Poligono industrial nº 2 – La Fuensanta 28936 Móstoles - Madrid - (España) Tel: +34 91 645 00 33 Fax: +34 91 645 69 62 e-mail: info@koolair.com
Open the catalog to page 19All KOOLAIR S.A catalogs and technical brochures
-
series FLOOR
23 Pages
-
series Dampers 100-2
21 Pages
-
FIRE protection
2 Pages
-
KOOLCOM
2 Pages
-
DFRE-P
1 Pages
-
PE-45
1 Pages
-
Acoustic
2 Pages
-
Series 100-200 Dampers
18 Pages
-
VENTILATION HOODS
6 Pages
-
Series SF Fire dampers
35 Pages
-
Series SCDC Smoke dampers
11 Pages
-
36-STE
2 Pages
-
DTP-GT Multi-nozzles diffusers
15 Pages
-
DTP Multi-nozzles diffusers
14 Pages
-
Koolair product range
2 Pages
-
Technical Selection Guide
145 Pages
-
Bypass terminal units – KMSR
15 Pages
-
Terminal units with fan – HVFS
12 Pages
-
Air Volume Boxes – Series KD
7 Pages
-
Measurement Station – EM
6 Pages
-
Passive chilled beams – VPK
9 Pages
-
Induction terminal units – IHK
20 Pages
-
Square diffusers – Series 50
22 Pages
-
Multinozzles diffusers – DF49MT3
20 Pages
-
Long-throw nozzles – DF 89
19 Pages
-
Long-throw nozzles – DF 49
19 Pages
-
Linear grilles – Series 30
19 Pages
-
S26
1 Pages
-
21-DVC/21-DVR
1 Pages
-
21-SVC/21-SVR
1 Pages
-
20-SH/21-SH
1 Pages
-
20-DH/21-DH
1 Pages
-
Circular diffusers – DCL
2 Pages
-
Extract valves – Series GPD
8 Pages
-
Circular diffusers – Series 40.1
31 Pages
-
Security grilles – KSG
12 Pages
-
Return grilles – Series 20.2
19 Pages
-
Supply grilles – Series 26
10 Pages
-
Regulating dampers
18 Pages
-
Silencers – Series SK
25 Pages
-
Linear Diffusers – Series 70.1
26 Pages
-
Circular diffuser – Series 40.1
31 Pages
-
Supply grilles – Series 20.1
19 Pages