Installation instructions
3Pages

Installation instructions TRIMMING (IF REQUIRED) All woodworking machines can generally be used (commercial handheld circular saws or jigsaws) to produce a sharp joint without any cracks. With jigsaws, we recommend using saw blades for wood or plastic and, with handheld circular saws, we recommend a saw blade that is not too coarse. For best results in terms of the cleanliness of the sawn edge, ensure that you use a guide rail or work on the back of the sheet. ADJUSTMENTS (IF REQUIRED) When making adjustments, you can also use commercial hand power drills or cordless screwdrivers, with the standard drill bits for metal and plastic. For larger holes, such as for fittings, water supply lines or drainage connections, use hole saws. Always follow our KÖMMERLING sheet manufacturing instructions for sawing and drilling information. WALL MOUNTING Whether you are working on a new building or renovation, the KömaStyle sheet can be attached directly to the surface of the wall. For best results, use the Kleiberit 584.0 adhesive. A similar mounting glue, which is compatible with absorbent and non-absorbent surfaces, can also be used here subject to approval from the adhesive manufacturer. The protective film must be removed from the back of the decorative sheet and the surface must be cleaned with a PVC cleaning agent. For best results, use the Kleiberit 820.0 toluenefree cleaning agent. A similar cleaning agent, which is compatible with PVC surfaces, can also be used here subject to approval from the cleaning agent manufacturer. Allow the cleaning agent used to dry sufficiently. SURFACE The surface to which you would like to attach the KömaStyle sheet must be solid, capable of load bearing, dry and dust-free. Variations in the evenness of the surface must be properly rectified at the beginning or taken into consideration accordingly when applying adhesive. An adhesive primer coating must be applied to absorbent surfaces before bonding the sheets. For best results, use the LUGATO universal adhesive primer or one from a similar manufacturer. Surfaces in areas that are exposed to moisture, e.g. baths and showers, must always be properly sealed in accordance with DIN 18534 before adhering our KömaStyle sheets. System primers and liquid sealants, such as those from LUGATO or similar manufacturers, are available for this purpose. profine GmbH | Business Unit Platten Zweibrücker Straße 200 | 66954 Pirmasens | Deutschland E-mail: info@komasheet

Installation instructions APPLYING THE ADHESIVE Pull the protective film off the back of the sheet. Clean the back of the sheet with the PVC cleaning agent and wait until it is fully dry. Then apply the adhesive in vertical lines to the back of the sheet. Ideally, it should be applied over the entire surface with a B15 toothed spatula. Please follow the manufacturing instructions relating to the specific mounting glue you are using. POSITIONING THE SHEET First of all, the sheet must be attached in the required position at the bottom. It is important to press down gently on the sheet from...

Installation instructions STORING AND HANDLING THE DECORATIVE SHEETS The sheets must be stored in a horizontal position in dry rooms, protected against exposure to wind and weather, at a temperature between 15 and 30 °C. Ideally, the sheets should also be transported in a horizontal position. If the sheets are transported in a vertical position, they must be held in place with a ratchet strap, which prevents deflection. When positioned outdoors or in front of glass facades, the sheets must be protected against direct solar irradiation with a cover (e.g. cardboard). This stops the sheets...