KOALA KARE PRODUCTS KB200 HORIZONTAL WALL MOUNTED BABY CHANGING STATION KB200-00 CREAM KB200-01 GREY KB200-05 WHITE GRANITE KB200-11 EARTH KB200 TECHNICAL DATA SHEET

19 11/16” (489 mm) liner dispenser dimensions when attached 42¼” (1073 mm) from top mounting hole to floor 44” (1118 mm) from floor to handle area located on both sides of unit. 33” (838 mm) 28¾” (730 mm) from bottom of closed bed to floor from bottom of bed to floor

MATERIALS: FDA approved injection-molded polypropylene with Microban® antimicrobial additive embedded into the bed surface. Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is 450 sq. in (2903 sq. cm) and comes complete with nylon safety strap and bag hooks. Dual cavity liner dispenser holds approximately 50 KB150-99 bed liners. OPERATION: Concealed pneumatic cylinder and metal mounting chassis provides controlled,...

INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. Installer should account for the space that a unit occupies when in the down position and with the caregiver (whether standing or seated) in front of the unit. Locate the unit so that paths...