*myarchiexpo

KB111-SSWM

Product catalog summary

Product Overview: The KB111-SSWM is a vertical wall-mounted baby changing station with a stainless steel finish. It is designed for durability and safety, featuring a high-density polyethylene body with Microban® antimicrobial protection and a brushed stainless steel finish.

Materials: The station is made from FDA-approved high-density polyethylene with Microban® antimicrobial protection, reinforced with a full-length steel-on-steel hinge mechanism. It includes 11-gauge steel mounting plates and hardware, molded-in graphics, and safety messages in six languages.

Operation: The unit features a concealed pneumatic cylinder for controlled opening and closing. It is easy to clean, resists odors and bacterial growth, and includes a built-in liner dispenser for approximately 25 sanitary liners. It complies with ASTM static load performance requirements.

Specifications: The station is surface-mounted and equipped with a pneumatic cylinder. It conforms to ASTM F 2285-04, ANSI Z535.4, and ASTM G21 standards. It includes a nylon safety strap, bag hooks, and a built-in liner dispenser. The product is backed by a 5-year limited warranty and is manufactured in the USA.

Installation: Installation should be performed by a qualified person. The unit must be mounted on a permanent wall capable of supporting significant weight. The station meets ADA regulations when properly installed. Detailed instructions are provided for drilling holes and using wood screws or toggle fasteners based on wall type.

Contact Information: Koala Kare Products, 6982 S Quentin St., Centennial, CO 80112. Toll-Free: 888.733.3456, Phone: 303.539.8300, Fax: 303.539.8399, Website: www.koalabear.com

Catalog excerpts

KOALA KARE PRODUCTS KB111-SSWM VERTICAL WALL MOUNTED STAINLESS STEEL FINISH BABY CHANGING STATION Finish face of wall 5¼” (133 mm) KB111-SSWM TECHNICAL DATA SHEET

Open the catalog to page 1

MATERIALS: FDA approved blow molded high-density polyethylene with Microban® antimicrobial clad in type 304 brushed stainless steel finish. Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included. Molded-in graphics & Safety Messages in six languages. Contoured changing surface area is 420 sq. in (2710 sq. cm) and comes complete with nylon safety straps and bag hooks. OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene is easy to clean and resists...

Open the catalog to page 2

INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. Drilling holes and mounting the station: 1. Remove the station from the shipping container and check for any freight damage. Identify the best location for installing the baby changing station....

Open the catalog to page 3