*myarchiexpo

KB110-SSWM

Product catalog summary

Overview: The KB110-SSWM is a horizontal wall-mounted baby changing station with a stainless steel finish, designed for public restrooms. It features a durable construction with safety and hygiene in mind.

Materials: The exterior is made of 18-gauge type 304 satin stainless steel, while the interior is high-density grey polyethylene with Microban antimicrobial protection. It includes a steel-on-steel hinge mechanism and 11-gauge steel mounting plates.

Operation: The station uses a concealed pneumatic cylinder for controlled opening and closing. It is easy to clean, resists odors, and supports ASTM static load requirements. A built-in liner dispenser holds approximately 25 sanitary liners.

Specifications: The unit is surface-mounted and complies with various safety and accessibility standards, including ICC A117.1-2009, ASTM F 2285-04, ANSI Z535.4, and ASTM G21. It includes a nylon safety strap, bag hooks, and a 5-year limited warranty.

Installation: Installation should be performed by a qualified person. The unit must be mounted on a permanent wall capable of supporting significant weight. Instructions include using wood screws or toggle fasteners depending on wall type, with specific measurements for mounting holes.

Contact Information: Koala Kare Products, 6982 S Quentin St., Centennial, CO 80112. Toll-Free: 888.733.3456, Phone: 303.539.8300, Fax: 303.539.8399, Website: www.koalabear.com

Catalog excerpts

KOALA KARE PRODUCTS KB110-SSWM HORIZONTAL WALL MOUNTED STAINLESS STEEL FINISH BABY CHANGING STATION Finish face of wall KB110-ssWM TECHNICAL DATA SHEET

Open the catalog to page 1

MATERIALS: 18 gauge, type 304 satin stainless steel exterior finish with FDA approved blow molded high-density grey polyethylene with Microban® antimicrobial interior. Reinforced fulllength steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included. Molded-in graphics and safety messages in six languages. Contoured changing surface area is 442 sq. in (2852 sq. cm) and comes complete with nylon safety straps and bag hooks. OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene...

Open the catalog to page 2

INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. Drilling holes and mounting the station: 1. Remove the station from the shipping container and check for any freight damage. Identify the best location for installing the baby changing station....

Open the catalog to page 3