*myarchiexpo

KB110-SSRE

Product catalog summary

Product Overview: The KB110-SSRE is a horizontal recessed mounted baby changing station with a stainless steel finish. It is designed for commercial use and complies with ADA regulations when properly installed.

Specifications: The unit features an 18 gauge, type 304 satin stainless steel exterior and a high-density grey polyethylene interior with Microban® antimicrobial protection. It includes a pneumatic cylinder for controlled opening and closing, a full-length steel-on-steel hinge, and a built-in liner dispenser for approximately 25 sanitary liners. The changing surface area is 442 sq. in (2851 sq. cm) and includes nylon safety straps and bag hooks.

Compliance and Standards: The station meets ICC A117.1-2009, ASTM F 2285-04, ANSI Z535.4, and ASTM G21 standards. It is designed to be barrier-free and accessible, conforming to ADA regulations when installed correctly.

Installation Instructions: Installation should be performed by a qualified person. The unit must be mounted on a permanent wall capable of supporting significant weight. The recommended installation height is 46½” from the floor. A rough wall opening of 35½” W x 20½” H with a minimum depth of 4¼” is required. The unit is secured using four ¼” x 3” wood screws.

Operation and Maintenance: The changing station is equipped with a concealed pneumatic cylinder for smooth operation. The high-density polyethylene surface is easy to clean and resists odors and bacterial growth. The unit includes universal instruction graphics and safety messages in six languages.

Warranty: The product comes with a 5-year limited warranty on materials and workmanship, including provisions for replacement due to vandalism.

Catalog excerpts

KOALA KARE PRODUCTS KB110-SSRE HORIZONTAL RECESSED MOUNTED STAINLESS STEEL FINISH BABY CHANGING STATION 37” (940 mm) Finish face of wall Rough Wall Opening 35½” (902 mm) wide 20½” (521 mm) high 4¼” (108 mm) minimum recessed depth ADA Compliance (when properly installed) 4.4.1 Max. Protruding Objects 4.2.5 Forward Reach 4.2.6 Side Reach 4.27.4 Operation KB110-ssre TECHNICAL DATA SHEET

Open the catalog to page 1

MATERIALS: 18 gauge, type 304 satin stainless steel exterior finish with FDA approved blow molded high-density grey polyethylene with Microban® antimicrobial interior. Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included. Molded in graphics and safety messages in six languages. Contoured changing surface area is 442 sq. in (2851 sq. cm) and comes complete with nylon safety straps and bag hooks. OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene...

Open the catalog to page 2

INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight, and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. 1. Remove changing station from the shipping container and check for any freight damage. Identify the best location for installing the unit. Hold the unit in place and open the bed. Make...

Open the catalog to page 3