*myarchiexpo

KB102

Product catalog summary

Specifications:
The KB102 Child Protection Seat is made from FDA-approved blow-molded high-density polyethylene with Microban® antimicrobial properties. It features a steel pivot rod in an aluminum tube hinge mechanism and includes nylon safety straps for securing the child. The seat supports static loads up to 50 lbs (22.7 kg) and is backed by a 5-year limited warranty.

Operation:
This seat is designed for wall mounting in restroom stalls or dressing rooms. It folds to less than 6 inches in depth and requires less than 2 square feet of wall space. The material is easy to clean and resists fungal and bacterial growth.

Installation:
Installation should be performed by a qualified person. The seat must be mounted on a wall or partition capable of supporting significant weight. The installation involves drilling holes and using supplied hardware to secure the seat. The seat should be positioned 2 inches from the bottom of the wall or 14 inches from the floor.

Warnings and Recommendations:
Proper installation is crucial to ensure the seat supports the intended loads. The manufacturer recommends using the seat as a template for locating mounting holes and ensuring adequate operating clearance.

Contact Information:
Koala Kare Products, 6982 S Quentin St., Centennial, CO 80112. Toll-Free: 888.733.3456, Phone: 303.539.8300, Fax: 303.539.8399, Website: www.koalabear.com

Catalog excerpts

KOALA KARE PRODUCTS KB102 CHILD PROTECTION SEAT KB102-00 CREAM KB102-01 GREY Finish face of wall Partition Panel Mount 2” (51 mm) from bottom of door or 14” (356 mm)from floor KB102 TECHNICAL DATA SHEET

Open the catalog to page 1

MATERIALS: FDA approved blow-molded high-density polyethylene with Microban® antimicrobial. Steel pivot rod in aluminum tube hinge mechanism. Textured seat surface with nylon safety straps that extend over child’s shoulders and between legs for security. OPERATION: Designed to mount on the wall of a restroom stall or a dressing room. Closed unit folds to less than 6” (143 mm), and requires less than 2 sq. ft (600 sq. cm) of wall space. High-density polyethylene is easy to clean and resists fungal and bacterial growth. Can withstand static loads of 50 pounds (22.7 kilograms). Warning: To ensure...

Open the catalog to page 2

INSTALLATION: To ensure proper installation and compliance with building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The Child Protection Seat must be properly installed onto wall or partition of restroom or fitting room that is capable of supporting significant weight and can accommodate the supplied installation hardware (or other suitable hardware, not included, if unit is to be installed on another type of wall such as a cinderblock or permanent wall). Drilling holes and mounting the station: 1. Remove the unit from the shipping container...

Open the catalog to page 3