KB100ST
3Pages

Catalog excerpts

KOALA KARE PRODUCTS KB100-ST HORIZONTAL RECESSED MOUNTED WITH STAINLESS STEEL FLANGE BABY CHANGING STATION KB100-00ST CREAM KB100-01ST GREY KB100-05ST WHITE GRANITE 37” (940 mm) Finish face of wall Rough Wall Opening 35½” (902 mm) wide 20½” (521 mm) high 4¼” (108 mm) minimum recessed depth ADA Compliance (when properly installed) 4.4.1 Max. Protruding Objects 4.2.5 Forward Reach 4.2.6 Side Reach 4.27.4 Operation KB100-ST TECHNICAL DATA SHEET

Open the catalog to page 1

MATERIALS: FDA approved blow-molded high-density polyethylene with Microban® antimicrobial embedded in the plastic and 18 gauge, type 304 brushed stainless steel finish flange. Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included. Molded-in graphics and safety messages in six languages. Contoured changing surface area is 442 sq in (2852 sq cm) and comes complete with nylon safety straps and bag hooks. OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed....

Open the catalog to page 2

To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. 1. Remove changing station from the 35-/1-(so2mm)apart inside measurement shipping container and check for any freight damage. Identify the best location for installing the unit. Hold the unit in...

Open the catalog to page 3