Inspiring Solutions Specification Sheet Key Features • 5-way universal dimming • Smooth flicker-free dimming, down to 1% • Compatible with high density LED & COB products • Universal input voltage - 120 to 277VAC • Constant power overload protection • Wire connectors pre-installed • UL rated for wet locations • 5-year warranty Description: Installation: 300W Driver Type: 288W Driver Type: Dimming: Output Dimming Method: Flicker: Input Voltage: Output Voltage: Wattage: Enclosure Rating: Listing: Certifications: Constant voltage dimmable LED driver Integrated junction box with multiple 7/8" knockouts 1-Channel, Class 1 3-Channel (96W per Channel), Class 2 5-way dimming: forward phase (MLV), reverse phase (ELV), 0-10V, PWM, and potentiometer Uses PWM method for dimmed low voltage output Meets California Title 24 / JA8 Universal 120VAC to 277VAC, 50/60Hz 24VDC 300W and 288W (3 x 96W) NEMA3R UL listed, wet location UL8750, FCC Consumer Limits (Class B) MEETS TITLE 24/JA8 REQUIREMENTS

Specification Sheet SPECIFICATIONS Input Output Voltage Max Load Output Current @ Maximum Load Output Dimming Method Flicker Output Ripple (Peak-to-Peak) Line Regulation Load Regulation Current Output Tolerance @ Maximum Load Channel-to-Channel Turn On Delay Time 24VDC per channel 96W per channel (unloaded channels permitted) 4.1A per channel PWM California Title 24 / JA8 < 5% ± 5% ± 5% ± 5% @ 100% Dim ± 5% @ 50% Dim < 0.5 sec Ambient Operating Temperature Dimming Curve Over Current Protection Over Voltage Protection Over Temperature Protection Overload Protection Short Circuit Protection Yes...

Specification Sheet

Specification Sheet WIRING DIAGRAMS FOR MAX5-300-24V (300W) ▼ Phase-Cut Dimmable Configuration ▼ Pink Purple Green (Ground) Wire Dimmer (Optional) White (Neutral) Wire Black Line/Hot Wire Note: Pink & purple wires are not used for this configuration. Pink Purple Green (Ground) Wire

Specification Sheet WIRING DIAGRAMS FOR MAX5-MLT-3-96-24V (96W per Channel) ▼ Phase-Cut Dimmable Configuration ▼ Pink Purple Green (Ground) Wire Dimmer (Optional) White (Neutral) Wire Black Line/Hot Wire Note: Pink & purple wires are not used for this configuration. Note: Different loads may be used on each channel, subject to minimum/maximum in specifications. Unused channels are okay. Pink Purple Green (Ground) Wire Note: Different loads may be used on each channel, subject to minimum/maximum in specifications. Unused channels are okay.