KI Brochure
12Pages

TABLE OF CONTENTS WHY KLIPSCH? KI SERIES TRACTRIX HORN SUBWOOFERS SPECIFICATIONS

For over 65 years, Klipsch has built premium loudspeakers with a no-compromise attitude, value engineered for superior performance and high reliability, and. adhering to sound principles pioneered by our founder, Paul W. Klipsch: • High Efficiency: the highest sound output for a given wattage input • Low Distortion: even the softest sounds are heard with clarity and detail, the loudest sounds without harshness or distortion • Controlled Directivity: the accurate projection of sound which, in turn, allows even distribution of sound in a given area • Controlled Frequency Response: producing...

KI SERIES PERMANENT INSTALL SPEAKERS WHEN PAUL W. KLIPSCH INTRODUCED SPEAKERS SUCH AS THE KLIPSCHORN, LASCALA, HERESY AND CORNWALL TO THE WORLD, THEY NOT ONLY BECAME POPULAR FOR HOME AUDIO ENJOYMENT BUT WERE UTILIZED IN MANY PERMANENT COMMERCIAL INSTALLATIONS SUCH AS HOUSES OF WORSHIP, SCHOOLS, STUDIOS AND MUSIC CLUBS DUE TO THEIR CLEAN, HIGH OUTPUT/LOW-DISTORTION SOUND SIGNATURES. TODAY, OUR KI LINE OF PERMANENT INSTALLATION SPEAKERS IS BUILT NOT ONLY TO THE KLIPSCH STANDARDS OF HIGH EFFICIENCY AND LOW DISTORTION BUT TO ADDRESS THE SPECIFIC NEEDS AND PERFORMANCE STANDARDS OF THE COMMERCIAL...

• Very high output capability with exceptional low-distortion clarity • Compact 22.5° symmetrical trapezoidal design • 15” (38.1cm) high excursion cast frame heavy-duty woofer • Large 3” (7.62cm) titanium diaphragm high frequency compression driver • 90” x 60” Tractrix® Horn for tight pattern control • 16 suspension points (4 per side) for flexible mounting and rigging bar compatibility • Internal high current full-range crossover • Black, White or Raw cabinet • High output low-distortion three way system • Rotatable midrange and HF drivers for 60º or 90º projection independent of speaker...

• Compact 22.5º symmetrical trapezoidal design two-way speaker • 12” (30.48cm) woofer and 1.75” (4.4cm) titanium diaphragm HF compression driver • 60” x 40” Tractrix® Horn for tight pattern control • Internal high current full-range crossover • 16 suspension points • KLIP-circuit mid and HF driver protection devices • Black, White or Raw cabinet • A compact, two-way, high performance loudspeaker with sides slanted at 65” and 45” • Excellent for placement at an angle or tight spaces • 8” (20.32cm) woofer and 1” (2.54cm) titanium diaphragm HF compression driver • 90” x 90” Tractrix® Horn •...

THE TRACTRIX HORN KLIPSCH USES A MODIFIED TRACTRIX EQUATION HORN GEOMETRY ON ITS DISTRIBUTED AUDIO SPEAKERS WHICH GAINS THE BENEFITS OF THREE DISTINCT HORN TYPES AND ALLOWS THE SOUND WAVE TO RELEASE FROM THE HORN WITH MINIMAL REFLECTIONS BACK INTO THE HORN. THIS, COMBINED WITH THE REDUCED DEPTH OF THE TRACTRIX HORN IN RELATION TO OTHERS, FURTHER REDUCES DISTORTION AND IMPROVES FREQUENCY RESPONSE AND OVERALL SOUND CLARITY, EVEN AT LOW BACKGROUND VOLUMES. THE TRACTRIX CURVE TRACTRIX EXPONENTIAL CONICAL HYPERBOLIC

• High power dual 15” (38.1cm) trapezoidal low frequency speaker system • Dual 15” (38.1cm) cast frame transducers with 3” voice coils • 131 dB SPL maximum output • 22.5° symmetrical trapezoidal design make it an ideal music reinforcement match with the KI-396, KI-362, KI-262 and KI-272 when using an external, active crossover • Low 40 Hz cabinet tuning allows electronic EQ to be added for extended response without undue component stress • 16 suspension points for flexible mounting and rigging bar compatibility • Black, White or Raw cabinet • High power 15” (38.1cm) driver low frequency...

DISPERSION ANGLE NOMINAL IMPEDANCE 8 Ohms, 5 Ohms Minimum 8 Ohms, 5.1 Ohms Minimum at 40Hz 8 Ohms, 6.8 Ohms Minimum at 180Hz 8 Ohms, 6.9 Ohms Minimum at 195Hz CROSSOVER FREQUENCY KLIP Overload Tweeter and Midrange Protection Circuit KLIP Overload Tweeter Protection Circuit KLIP Overload Tweeter and Midrange Protection Circuit KLIP Overload Tweeter Protection Circuit KDE-75 3” Titanium Diaphragm Compression Driver K-792-TI-KP 1” Titanium Diaphragm Compression Driver K-70-G 1.75” Titanium Diaphragm Compression Driver K-70-G 1.75” Titanium Diaphragm Compression Driver K-103-TI-KP 1” Titanium...

DISPERSION ANGLE NOMINAL IMPEDANCE 8 Ohms, 4.5 Ohms Minimum at 8kHz 8 Ohms, 5.3 Ohms Minimum at 42Hz 8 Ohms, 5.3 Ohms Minimum at 42Hz 8 ohms, 3.6 Ohms Minumum @ 22Hz woofers wired in parallel CROSSOVER FREQUENCY OVERLOAD PROTECTION KLIP Overload Tweeter Protection Circuit K-103-TI-KP 1” Titanium Diaphragm Compression Driver K-8-E 8” Woofer HIGH FREQUENCY HORN ENCLOSURE MATERIAL INPUT CONNECTIONS Five-way Binding Post Two Point Barrier Strip Two NL-4 Speakon Connectors Wired in Parallel Barrier strip WIDTH FRONT WIDTH BACK SHIPPING WEIGHT Black, White and Raw Birch Black, White and Raw Birch...

3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA 1-800-KLIPSCH ©2014 KLIPSCH GROUP, INC. ALL RIGHTS RESERVED. KLIPSCH, KEEPERS OF THE SOUND AND TRACTRIX ARE REGISTERED TRADEMARKS OF KLIPSCH GROUP, INC. A WHOLLY-OWNED SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION. DOLBY IS A REGISTERED TRADEMARK OF DOLBY LABORATORIES.