*myarchiexpo

Ucontrol

Product catalog summary

Specifications and Features
Ucontrol is a lift controller system designed for modernization and efficiency, integrating the lift controller and inverter into one unit. It features a digital shaft copying system using the motor's encoder, eliminating the need for an additional shaft encoder. It complies with various standards such as EN81.1 + A3, EN81.21, EN81.28, EN81.70, EN81.72, EN81.73, and GOST, supporting up to 48 stops and speeds of up to 4m/s.

Energy Consumption
Ucontrol is optimized for low energy consumption, with a 5.5kW model consuming only 5W when idle.

Reliability and Safety
The system includes redundant safety designs and double protection for microprocessors, ensuring high reliability and security.

Ride Quality
Ucontrol enhances ride quality by automatically calculating terminal velocity and deceleration rates, reducing travel time and increasing efficiency. PWM dead zone compensation technology minimizes motor noise and losses.

Ease of Installation
The system offers plug-and-play electrical installation, reducing cable requirements. It includes a hand terminal for parameter programming, fault finding, and real-time monitoring.

Advanced Group Control Management
Ucontrol supports centralized control for up to eight lifts, optimizing efficiency and minimizing waiting times through advanced call management techniques.

Destination Control System
The system integrates advanced dispatching technologies to ensure high efficiency and safety, reducing waiting times and energy consumption.

Remote Monitoring System
Ucontrol's remote monitoring system allows for lift management from a remote control room, providing real-time fault and operational status monitoring.

Emergency Functions
The system includes emergency functions such as fire emergency operation, earthquake operation, and automatic evacuation, ensuring safety during emergencies.

Models
Ucontrol offers various models including the MR Model for installations with a machine room, the All in One Model for traction lifts with synchronous motors, and the Door Frame Model with a controller in the door frame.

Lift Control Functions

User Control: The lift is controlled by a user inside the car, with only car calls registered and executed.
Car Elevator Lock: Sets the lift out of order, deleting registered calls and blocking car call acceptance.
Landing Elevator Lock: Sets the lift out of order at a predefined landing, deleting registered calls and blocking car call acceptance.
Parking: Sends the lift to a predefined landing after being idle for a programmable period.

Special Control Functions

Landing or Car Call Acceptance Blocking: Cancels existing and prevents new landing calls.
Door Blocking: Blocks door operation on specific landings.
Visitor’s Command: Allows an apartment owner to activate a function for visitor use.
Zero Load Priority: Users can only exit from the door they entered, serving opposite door calls only if the car is empty.

Access Control Functions

Standby Mode: Saves power by switching off displays after the lift is idle for a programmable period.
Car Light Timer: Saves power by switching off car lights after being idle for a programmable period.
IED Sleep Mode: Reduces standby consumption to a minimum if the lift is idle for a short period.

Misuse Prevention Functions

Car Call Cancellation: Allows passengers to cancel a registered car call.
Anti-Nuisance Car Call Function: Prevents false registration and execution of car calls based on passenger presence.
Alarm Filtering: Filters emergency call device activation according to EN81.28.

Door Control Functions

Door Open Button: Allows opening or reopening of doors.
Door Close Button: Overrides remaining door open time and causes immediate closing.
Door Hold: Keeps doors open for a specific time.
Door Nudging: If doors are prevented from closing for a preset time, they begin closing at reduced speed with an acoustic signal.

Catalog excerpts

Your !»' Choice in Lifts Lift Controller

Open the catalog to page 1

KLEEMANN Ucontrol Ucontrol integrates the lift controller and inverter in one unit providing modern and future oriented design. Additionally, Ucontrol offers revolutionary digital shaft copying system with the use of the motor’s encoder. Thereby there is no need for extra, high in cost, shaft encoder. R i de Q ual i t y Ucontrol was designed to ensure outstanding ride quality. Terminal velocity and deceleration rate is calculated automatically in the most effective way, according to the distance to be travelled, on every run. Faster ride times are ensured due to controller continuously updating...

Open the catalog to page 2

KLEEMANN Ucontrol E a s e of i n s tallat i o n Handling through Hand Terminal connecting either to Control panel, Car top revision Box or Cop: -Parameter programming (controller and inverter related) -Fault finding tool (controller and inverter related) -Travel commands -Real time speed curve -Real time monitoring of movement related values (Speed, Amps) -Menu available in English, German, French, Russian, Turkish Range of use | Anwendungsbereich Compatible to ΕΝ81.1 + Α3, ΕΝ81.21, EN81.28, EN81.70, EN81.72, EN81.73, GOST Up to 48 stops Autotuning performed automatically during the first movement...

Open the catalog to page 3

KLEEMANN Ucontrol D e s t i n at io n Co n t rol S ys t e m C o n f i g u r at i o n | K o n f i g u r at i o n F eat u r e s High efficiency and safety It integrates various advanced dispatching technologies such as expert system, fuzzy logic and neural network, to ensure the high efficiency and safety of the lift based on CAN bus. Passenger comfort The system guides passengers to the assigned lift, reduces the average waiting time and long-time waiting rate, contributing to less crowded lobbies. Cost reduction Improvement of the operation efficiency can reduce the total number of lifts installed...

Open the catalog to page 4

KLEEMANN Ucontrol Remote Monitoring System The Remote Monitoring System allows the management of lifts installed in one or several buildings, from a remote control room. The system is CAN Bus based and the connected lifts can be monitored through an intelligent and user friendly software with graphical enviroment, installed on PC. Features such as real-time fault and operational status monitoring, intelligent fault reading function, simultaneous monitoring of multiple lifts, ability to control and adjust the lifts, reports and analysis of the lifts performance, make the system a versatile tool...

Open the catalog to page 5

KLEEMANN Ucontrol Ucontrol - All in One model Available for Traction lift with synchronous motor All included in a single cabinet. Ucontrol - Das Alles in einem Modell Verfügbar für Traktionsaufzüge mit Synchronmotor UPS powered automatic emergency rescue Alles inbegriffen in einem einzigen Kasten. Hand Terminal & Speed Display provided as standard Kastenabmessungen: 2y10 (H) x460 (B) x300 (T), y = 2, 3, 4, 5 Automatische Notfallversorgung über UPS Handterminal & Geschwindigkeits - Display inbegriffen der Standardausführung Ucontrol - Door Frame Model Available for Traction lift with synchronous...

Open the catalog to page 6

KLEEMANN Ucontrol Landing or Car Call Acceptance Blocking on Any Floor Sperren von Anhalten und Rufannahme Auf Jedem Beliebigen Stockwerk Fire Emergency Function Brandfall-Funktion Fireman Operation Bedienung durch die Feuerwehr Emergency Notfall Dynamic Setting of Fire emergency landing through smoke detectors Dynamische Einstellung der Haltestufen im Brandfall über Rauchmelder Earthquake operation Betrieb bei Erdbeben Automatic evacuation Automatische Evakuierung Sequential evacuation with the use of generator Schrittweise Evakuierung mit Hilfe eines Generators Function according to EN81.73...

Open the catalog to page 7

Door open button Türöffnungsknopf Door close button Door Türschließungsknopf control Tür Door hold steuerung Türhalteknopf Door nudjing Drängelung der Tür Car call cancellation Aufzugruf-Annullierung Misuse prevention Anti-nuisance car call functions function Missbrauch Aufzugruf-Störungsschutz sprävention Alarm filtering Alarmfilter Stand by mode Standby - Modus Energy saving Car light timer functions Kabinenbeleuchtungs Energiespar- -Zeitschalter funktionen IED sleep mode IED-Schlafmodus Allows the opening or re-opening of doors Erlaubt das Öffnen oder das erneute Öffnen von Türen Override,...

Open the catalog to page 8

Open the catalog to page 9

Ucontrol

Ucontrol

Catalog excerpts

All KLEEMANN catalogs and technical brochures