Page 5 Sliding door width dimensions Clearance profile Height dimensions Smallest type Biggest type Standard type Special system: maximum load for extra charge. To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. Car width for platform width 230 cm [7’-7’’]. If wider platforms are used it is also possible to park wider cars. Potential equalization from foundation grounding connection to system (provided by the customer). Slope with drainage channel and sump. These floor areas need to be horizontal and on equal level across the full width of the pit For convenient use of your parking space and due to the fact that the cars keep becoming longer we recommend a pit length of 570 cm [18’-8’’]. At the transition section between pit floor and walls no hollow mouldings/coves are possible. If hollow mouldings/coves are required, the systems must be designed smaller or the pits accordingly wider. If sprinklers are required make sure to provide the necessary free spaces during the planning stage. TrendVario 4100 | Code numbe 585.32.110-015 | Version 04.2019 See page 2 for all pit and height dimensions. Page 10 Technical data Standard passenger cars: Limousine, Station Sagon, SUV, Van according to clearance and maximum surface load. Width Water drainage Dimensions: cm [ft] Weights: kg [lbs] Forces: kN [lbf] Temperature: °C [°F] Page 7 Approach Free spaces Function Page 9 Load plan Page 6 Roll door width dimensions Page 8 Load plan Detail doors see page 3 to 6 Page 4 Sliding door width dimensions Page 3 Sliding door width dimensions Single parking spaces can Loadable up to also be upgraded to handle 2600 kg [5730 lbs] heavier loads at a later date! Tolerances for space 3 requirements

TrendVario 4100 I Code number 585.32.110-015 I Version 04.2019 Page 1 Section Car data Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Car height Car height Height GF LF Height GF LF Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Page 7 Approach Free spaces Function Page 8 Load plan Page 9 Load plan Car height Car height Height GF LF Car height Car height Height GF LF Page 11 Electrical To be performed by the customer

TrendVario 4100 I Code number 585.32.110-015 I Version 04.2019 Garages with sliding doors (standard) I Widths dimensions Sliding door behind columns Page 1 Section Car data Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Page 7 Approach Free spaces Function Page 8 Load plan Columns per each grid unit Usable platform width ©According to the ASR A1.7 , an inspection book is required for the commercial use of a gate with electric drive. Prior to commissioning, and then once a year, the gate has to be...

TrendVario 4100 | Code number 585.32.110-015 | Version 04.2019 Garages with sliding doors (standard) | Widths dimensions Sliding door between columns Page 2 Height dimensions Page 3 Sliding door width dimensions Page 5 Sliding door width dimensions Page 7 Approach Free spaces Function Page 4 Sliding door width dimensions Page 6 Roll door width dimensions Columns per each grid unit Not available! Columns every second grid unit Page 8 Load plan Page 9 Load plan Carriageway in accordance with local regulations No. of grids x RB + 20 [8‘‘] Page 10 Technical data According to the ASR A1.7, an inspection...

TrendVario 4100 I Code number 585.32.110-015 I Version 04.2019 Garages with sliding doors (standard) I Widths dimensions Sliding door in front of columns Page 1 Section Car data Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Page 7 Approach Free spaces Function Page 8 Load plan Columns per each grid unit Carriageway in accordance with local regulations Usable platform width Page 9 Load plan Columns every second grid unit Usable platform width 480 [15'-9i'] Page 11 Electrical To be performed by the customer...

TrendVario 4100 | Code number 585.32.110-015 | Version 04.2019 Garages with roll doors | Widths dimensions Roll door behind columns Page 2 Height dimensions Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Columns per each grid unit Page 9 Load plan Carriageway in accordance with local regulations For parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm [8’-10’’]. Please consider adjoining grids. Problems may occur if smaller platform widths...

TrendVario 4100 I Code number 585.32.110-015 I Version 04.2019 Page 1 Section Car data Approach Page 2 Height dimensions Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions OThe illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility. Longitudinal free space Page 5 Sliding door width dimensions Free space above the door Page 6 Roll door width dimensions Empty ; space Entrance level Page 7 Approach Free...

Page 6 Roll door width dimensions Page 7 Approach Free spaces Function Page 8 Load plan Page 10 Technical data Page 11 To be performed by the customer Page 12 F6 Page 9 Load plan Page 5 Sliding door width dimensions Page 4 Sliding door width dimensions Page 3 Sliding door width dimensions Page 2 Height dimensions Load plan

TrendVario 4100 I Code number 585.32.110-015 I Version 04.2019 Load plan - top view Page 1 Section Car data Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Usable platform width _ RB H _ RB1 _,RB2_ Page 7 Approach Free spaces Function Page 8 Load plan Page 9 Load plan OThe system is dowelled to floor and walls. The drilling depth in the floor is approx. 15 cm [6'']. The drilling depth in the walls is approx. 12 cm [5'']. Floor and walls are to be made of concrete (grade of concrete min. C20/25)! The...