TrendVario 4000
13Pages

PRODUCT DATA Free space Detail free space see page 3 to 6 Page 5 Sliding door width dimensions Tolerances for space 3 requirements + 0 [+ 1’’ ] 0 Dimensions: cm [ft] Weights: kg [lbs] Forces: kN [lbf] Temperature: °C [°F] Standard passenger cars: Limousine, Station Sagon, SUV, Van according to clearance and maximum surface load. Standard 190 cm [6‘-3‘‘] Rail system see page 9 Clearance profile Page 7 Grid arrang. Approach Free spaces Function Page 6 Roll door width dimensions Page 8 Load plan Single parking spaces can Loadable up to also be upgraded to handle 2600 kg [5730 lbs] heavier loads at a later date! Page 4 Sliding door width dimensions Detail doors see page 3 to 6 Page 3 Sliding door width dimensions Page 2 Height dimensions Height dimensions See page 2 for all pit and height dimensions. Standard type Special system: maximum load for extra charge. To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. Car width for platform width 230 cm [7’-7’’]. If wider platforms are used it is also possible to park wider cars. Potential equalization from foundation grounding connection to system (provided by the customer). Tolerances for the evenness of the carriageway (floor) must be strictly complied with in accordance with DIN (=German Industrial Standard) No. 18202, chart 3, line 3. For convenient use of your parking space and due to the fact that the cars keep becoming longer we recommend a pit length of 580 cm [19’-0’’]. If sprinklers are required mak

TrendVario 4000 I Code number 585.84.710-012 I Version 04.2019 Page 1 Section Car data Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Car height Car height Height UF GF Car height Car height Height UF GF Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Page 7 Grid arrang. Approach Free spaces Function Page 8 Load plan Car height Car height Height UF GF Car height Car height Height UF GF Page 11 Electrical To be performed by the customer Car height Car height Height UF GF Ca r height Ca r height Height...

TrendVario 4000 | Code number 585.84.710-012 | Version 04.2019 Garages with sliding doors (standard) | Widths dimensions Sliding door behind columns Page 2 Height dimensions Columns per each grid unit Page 8 Load plan Columns every second grid unit Carriageway in accordance with local regulations Carriageway in accordance with local regulations Page 10 Technical data Page 7 Grid arrang. Approach Free spaces Function Page 4 Sliding door width dimensions Page 6 Roll door width dimensions Free space Page 3 Sliding door width dimensions Page 5 Sliding door width dimensions According to the ASR...

TrendVario 4000 | Code number 585.84.710-012 | Version 04.2019 Garages with sliding doors (standard) | Widths dimensions Sliding door between columns Page 2 Height dimensions Page 4 Sliding door width dimensions Page 6 Roll door width dimensions Page 7 Grid arrang. Approach Free spaces Function Columns every second grid unit Carriageway in accordance with local regulations According to the ASR A1.7 , an inspection book is required for the commercial use of a gate with electric drive. Prior to commissioning, and then once a year, the gate has to be inspected by an expert and the findings...

TrendVario 4000 | Code number 585.84.710-012 | Version 04.2019 Sliding door in front of columns Free space Type 4000 Page 2 Height dimensions Page 4 Sliding door width dimensions Columns per each grid unit Page 7 Grid arrang. Approach Free spaces Function Carriageway in accordance with local regulations Page 8 Load plan Columns every second grid unit Page 10 Technical data Page 6 Roll door width dimensions Page 3 Sliding door width dimensions Page 5 Sliding door width dimensions Garages with sliding doors (standard) | Widths dimensions Carriageway in accordance with local regulations...

Garages with roll doors | Widths dimensions Roll door behind columns Page 3 Sliding door width dimensions Carriageway in accordance with local regulations According to the ASR A1.7 , an inspection book is required for the commercial use of a gate with electric drive. Prior to commissioning, and then once a year, the gate has to be inspected by an expert and the findings entered in the inspection book. The inspection has to be carried out independent of any maintenance work. Page 10 Technical data Columns per each grid unit Page 8 Load plan Page 7 Grid arrang. Approach Free spaces Function...

TrendVario 4000 I Code number 585.84.710-012 I Version 04.2019 Page 1 Section Car data Grid arrangement For 2 rows max. 6 grids Page 3 Sliding door width dimensions Operating device ±===u Page 4 Sliding door width dimensions Approach Page 5 Sliding door width dimensions Page 6 Roll door width dimensions Page 7 Grid arrang. Approach Free spaces Function OThe illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility....

Page 2 Height dimensions Page 3 Sliding door width dimensions Page 4 Sliding door width dimensions Page 5 Sliding door width dimensions Load plan TrendVario 4000 | Code number 585.84.710-012 | Version 04.2019 Load plan – top view F2 Page 6 Roll door width dimensions Page 7 Grid arrang. Approach Free spaces Function Page 8 Load plan Page 10 Technical data Page 11 To be performed by the customer Page 12 Platform load in kg Platform load 2000 kg 2600 kg Platform load in lbs Platform load 4400 lbs 5730 lbs The system is dowelled to floor and walls. The drilling depth in the floor is approx. 15 cm...

Rail load by moving traffic load: – For surface load 2000 kg [4400 lbs]: 6,5 kN [1,461lbf] per wheel – For surface load 2600 kg [5730 lbs]: 8 kN [1,798 lbf] per wheel Laying on finished floor Direction of parking Guide rail 1,5 [0,6‘‘] Top edge of finished floor Tolerances for the evenness of the carriageway must be strictly complied with in accordance with DIN (= German Industrial Standard) No. 18202, chart 3, line 3. No expansion joints are permitted within the area of the rail system. 1 We do not recommend mastic asphalt. Evenness and Tolerances (abstract from DIN 18 202, table 3) The...