Overview

This document provides comprehensive technical specifications and installation guidelines for the SingleVario 2061 automated parking system by KLAUS Multiparking GmbH, designed primarily for basement garages and similar environments.

1. Product Specifications

• Load Capacity: Standard platform supports up to 2000 kg (4400 lbs), with an optional special system supporting up to 2600 kg (5730 lbs).
• Platform Dimensions: Standard width is 230 cm (7'-7"), with wider options up to 270 cm (8'-10") recommended for larger vehicles. Lengths range from 520 cm (17'-1") minimum to 540 cm (17'-9") recommended.
• Height Requirements: Platform height must exceed the tallest vehicle by at least 5 cm (2"). Multiple height variants accommodate different garage ceiling heights.
• Safety Markings: Yellow-black 10 cm (4") wide markings compliant with ISO 3864 and DIN EN 14010 must be applied at platform edges to indicate danger zones.
• Steel Pillar Bases: Two sizes (short and long) with specified load forces; grounding and potential equalization are customer responsibilities.

2. Dimensional Data

• Dimensions are given in cm and feet/inches with tolerances per VOB part C (DIN 18330, 18331) and DIN 18202.
• Minimum finished dimensions are specified for all space requirements.
• Platform width varies based on garage configuration (door presence, dividing walls, columns).
• Recommended maximum platform width is 270 cm to avoid parking difficulties, especially for edge boxes and vehicles with larger turning radii.
• Approach slopes must not exceed 4% descending and 14% ascending for safe maneuvering.

3. Functional Layout and Configurations

• Supports single, double, and triple platform arrangements.
• Platform widths and carriageway dimensions coordinated with local regulations and garage door specifications.
• Dividing walls require 10 x 10 cm cutouts for installation.
• Garage door dimensions must be coordinated with suppliers and local authorities.

4. Installation and Safety Guidelines

• Vehicles on lower platforms must be removed before lowering upper platforms.
• Grounding and potential equalization connections are customer responsibilities.
• Platform edges must have clear danger zone markings.
• Installation tolerances must comply with relevant DIN standards.

5. Load Plan and Forces

• Load forces on steel pillar bases vary by base size; forces detailed in kN and lbf.
• Examples include forces ranging from +0.5 to +36 kN depending on position and load.

6. Additional Notes

• All dimensions are minimum finished values; tolerances must be accounted for.
• Platform sizes should be selected based on vehicle types and local regulations.
• Wider platforms and driveways recommended for larger vehicles like SUVs and limousines.
• Customer responsible for safety markings and grounding.

7. Installation Requirements and Structural Specifications

• Concrete floor and walls must be minimum quality C20/25.
• Anchoring drilling depth approx. 15 cm (6").
• Lateral support mandatory; if absent, additional stand with base area 40 x 25 cm required.
• Safety markings must comply with ISO 3864 (yellow-black stripes, 10 cm wide).

8. Electrical Installation

• Customer performs electrical installation per wiring diagrams.
• Main fuses/circuit breakers vary by unit power rating (3.0 kW to 4.0 kW).
• Supply lines specified by cross-section and phase configuration.
• Grounding with foundation earth connectors every 10 m and equipotential bonding per DIN EN 60204.
• Control lines and operating devices included; installation on column or door frame.

9. Technical Data and Environmental Conditions

• Low-noise hydraulic power units mounted on rubber-metal mounts.
• Recommended to separate parking system from residential areas to minimize noise.
• Operating temperature range: -10 to +40 °C (14 to 104 °F).
• Relative humidity max 50% at 40 °C.
• Lifting/lowering times specified at 10 °C; longer times at lower temperatures or longer hydraulic lines.
• Corrosion protection requires adherence to cleaning and ventilation guidelines.

10. Compliance, Safety, and Sound Insulation

• Complies with DIN EN 14010, EC Machine Directive 2006/42/EC, and TÜV SÜD certification.
• Safety railings per DIN EN ISO 13857 required near traffic routes and during construction.
• Customer must provide safety fences, lighting, ventilation, fire extinguishing, and alarm systems per regulations.
• Sound insulation per DIN 4109-1 and VDI 4100: max 30 dB(A) normal, 25 dB(A) increased insulation in living/sleeping rooms.
• Sound protection package from KLAUS Multiparking and minimum building sound insulation (R’w) of 57 dB or 62 dB required.

11. Customer Responsibilities

• Install safety fences and railings per DIN EN ISO 13857.
• Number parking spaces.
• Provide lighting, ventilation, fire safety systems, and comply with regulations.
• Perform wall cuttings as needed.
• Apply ISO 3864 compliant safety markings on platform edges.
• Ensure suitable electrical supply and grounding.
• Support commissioning with electrician if necessary.
• Provide cable conduits and recesses for operating devices.

12. System Description and Components

• Two-level dependent parking system for two cars, one above the other.
• Lower vehicle parks on floor plate and must be removed before lowering upper platform.
• Features adjustable platform height and load capacity up to 2600 kg.
• Two steel pillars with selectable short or long bases.
• Two sliding platforms with sliding bearings.
• Mechanical synchronization control for hydraulic cylinders.
• Hydraulic cylinder with automatic safety valve to prevent accidental lowering.
• End-to-end accessible parking bays with adjustable wheel stops and canted access plates.
• Hydraulic system includes solenoid valve, safety valve, hoses, and control elements.
• Electrical system includes hold-to-run operating device with master keys, terminal box, locking device, and chain control.
• Low-noise hydraulic power unit with oil reservoir, pump, clutch, motor, contactor, pressure relief valve, and noise-reducing hoses.
• KLAUS Multiparking reserves the right to update specifications without notice.

Summary

The SingleVario 2061 is a versatile, height-adjustable automated parking system designed for basement garages, supporting vehicles up to 2600 kg with customizable platform dimensions. The document emphasizes compliance with local regulations, proper installation, and safety markings for optimal operation. Detailed dimensional data, load plans, installation instructions, electrical requirements, and customer responsibilities are provided to ensure safe and effective use.