SingleUp 3015
5Pages

Page 1 Section Dimensions Car data Page 2 Width dim. Function Approach Free space Page 3 Load plan Page 5 To be performed by the customer Description All space requirements are minimum finished dimensions. Tolerances for space requirements+3. 2 Dimensions in cm. EB (single platform) = 2 vehicles Standard passenger cars: Limousine, station wagon, SUV, van according to clearance and maximal surface load. width 190 cm weight max. 2000 kg wheel load max. 500 kg Clearance profile <i Standard type <2 To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. <3 If the total length is greater, the max. vehicle length for the lower parking space increases accordingly. <4 For dividing walls: cutting through 10 x 10 cm. (5 Potential equalization from foundation grounding connection to system (provided by the customer). <6 In compliance with DIN EN 14 010, 10 cm wide yellow-black markings compliant to ISO 3864must be applied by the customer to the edge of the platform in the access area to mark the danger zone in front of the supporting surface of the upper platform edge (see „Load Plan“ Page 4). <7 Must be at least as high as the greatest car height + 5 cm. SingleUp 3015 I Code number 583.91.510-007 I Version 12.2016

SingleUp 3015 | Code number 583.91.510-007 | Version 12.2016 Width dimensions for garage without door (basement garage) Page 2 Width dim. Function Approach Page 3 Load plan Electrical installation Technical data Carriageway in accordance with local regulations System lifted System in middle position System lowered Before lowering the platforms, the vehicle parked in the lower parking space must be driven off! Before lowering the upper platform, the vehicle parked on the lower platform must also be driven off! horizontal The illustrated maximum approach angles must not be exceeded. Incorrect...

Load plan Page 2 Width dim. Function Approach Page 3 Load plan Electrical installation Technical data SingleUp 3015 | Code number 583.91.510-007 | Version 12.2016 Units are dowelled to the floor. Drilling depth: approx. 15 cm. Floor and walls are to be made of concrete (quality minimum C20/25)! The dimensions for the points of support are rounded values. If the exact position is required, please contact KLAUS Multiparking. Marking compliant to ISO 3864 (colors used in this illustration are not ISO 3864 compliant

SingleUp 3015 I Code number 583.91.510-007 I Version 12.2016 Page 1 Section Dimensions Car data Electrical installation Installation diagram Electrical data (to be performed by the customer) Page 2 Width dim. Function Approach Page 3 Load plan Page 5 To be performed by the customer Description No. Qunatity Description Position Frequency 1 1 Electricity meter in the supply 2 1 Main fuse : 3 x fuse 16 A (slow) in the supply 1 per unit or circuit breaker 3 x 16 A line (trigge r characteristic K or C) 3 1 S upp ly lin e 5 x 2. 5 m m2 to main...

Page 2 Width dim. Function Approach Page 3 Load plan Electrical installation Technical data To be performed by the customer Description Safety fences Any constraints that may be necessary according to DIN EN ISO 13857 in order to provide protection, for pathways directly in front, next to or behind the unit. This is also valid during construction. Numbering of parking spaces Consecutive numbering of parking spaces. Operating device Cable conduits and recesses for operating device (for double wing doors: please contact the local agency of KLAUS Multiparking). Operating device exposed...