Catalogs >
KLAUS Multiparking GmbH >
ParkDisc D450

ParkDisc D450
4Pages

Catalog excerpts

PRODUCT DATA Section Dimensions Car data Page 2 Recess plan below oor Recess plan above oor ParkDisc D450 (below oor level) Page 3 Top edge nished oor Tolerances for the evenness of the carriageway must be strictly complied with in accordance with DIN (= German Industrial Standard) No. 18202, chart 3, line 3. Required space: min. Ø 550 (in case of vehicle length 500) Electrical installation Technical data Page 4 To be performed by the customer Description Top edge finished floor Dimensions All space requirements are minimum nished dimensions. 3 Tolerances for space requirements + 0 . Dimensions in cm. Suitable for Standard passenger cars: Limousine, station wagon, SUV, van, according to maximal surface load. Center bearing; dowelled; length of dowel: 10 cm length weight wheel load Drainage Ø 4 Conduit EN 25 (M25) with taut wire Turning part Fixed part Top edge finished floor To follow the minimum nished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. ParkDisc D450 | Code number 583.91.740-005 | Version 02.2013 ParkDisc D450 (above oor level)

Open the catalog to page 1

ParkDisc D450 | Code number 583.91.740-005 | Version 02.2013 Dimensions Car data Page 2 Recess plan with drive unit below oor level Conduit EN 25 (M25) with taut wire Recess plan below oor Recess plan above oor Page 3 Electrical installation Technical data Drainage Ø 4 Page 4 To be performed by the customer Conduit EN 25 (M25) with taut wire Recess plan with drive unit above oor level Conduit EN 25 (M25) with taut wire 10 For above oor level only the shaft for the drive unit is required (80 x 50 x 22.5)

Open the catalog to page 2

ParkDisc D450 | Code number 583.91.740-005 | Version 02.2013 Page 1 Section Dimensions Car data Page 2 Recess plan below oor Recess plan above oor Page 3 Electrical installation Technical data Page 4 To be performed by the customer Description Electrical data Electrical supply – Supply line 5 x 1.5 mm2 (3 PH +N+ PE) to the main cabinet with lockable main switch. It is possible, that special laying system and big length of the cable necessitate larger cable. The electric installation must correspond to the local standards. Operating device Easy-to-survey positioning (e.g. on column). – Main...

Open the catalog to page 3

ParkDisc D450 | Code number 583.91.740-005 | Version 02.2013 Page 1 Section Dimensions Car data To be performed by the customer Main switch Lockable main switch per main cabinet. The lockable main switch is to be mounted directly next to the main cabinet. Page 2 Recess plan below oor Recess plan above oor Page 3 Electrical installation Technical data Page 4 To be performed by the customer Description Recess Recess for drive motor and ParkDisc, drainage of the recess. Conduit Conduit EN 25 (M25) with taut wire between the drive pit and the main cabinet. Embedding Embedding in concrete....

Open the catalog to page 4