Page 1 Section Dimensions Car data PRODUCT DATA cc baseuio eb 2000 kg 1 / 2600 kg 2 Dimensions Page 3 Approach Load plan Page 6 Tec. data To be performed by the customer All space requirements are minimum finished dimensions. Tolerances for space requirements+0. ^ Dimensions in cm. EB (single platform) = 1 + 1 vehicles Suitable for Standard passenger cars: Limousine, station wagon, SUV, van according to clearance and maximal surface load. weight max. 2000 kg max. 2600 kg wheel load max. 500 kg max. 650 kg Clearance profile <1 Standard type <2 Special system: maximum load for extra charge. <3 To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. (4 Car width for platform width 230 cm. If wider platforms are used it is also possible to park wider cars. <5 Potential equalization from foundation grounding connection to system (provided by the customer). <6 Slope with drainage channel and sump see page 3. <7 In compliance with DIN EN 14010, 10 cm wide yellow-black markings compliant to ISO 3864 must be applied by the customer to the edge of the pit in the entry area to mark the danger zone (see „load plan“ page 4). <8 At the transition section between pit floor and walls no hollow mouldings/coves are possible. If hollow mouldings/coves are required, the systems must be designed smaller or the pits accordingly wider. <9 If necessary, protective gratings are installed at the back area 10 The upper platform is a frame construction. Flooring can be provided by the customer (e.g. soil/turf, sandbed/turfblock, sandbed/marble, etc.). Maximum weight of customer coating 250 kg/m2. The upper platform is at ground level and is traversible when in lowered position (vehicle load: 2600 kg maximum, wheel load: 650 kg maximum). On special conditions the upper platform may be used as parking space. 11 A separate maintenance manhole must be installed by the customer (with manhole cover, ladder and a connecting passage to the pit). A save maintenance access with a door has to be provided by the customer - please contact KLAUS Multiparking. The hydraulic power unit and ventilation system are also housed in the maintenance manhole O After operation, the system must always be run into the lowest final position (key interlock). MultiBase U10 EB I Code number 588.52.620-001 I Version 03.2018

MultiBase U10 EB I Code number 588.52.620-001 I Version 03.2018 Width dimensions Page 1 Section Dimensions Car data Page 3 Approach Load plan Page 6 Tec. data To be performed by the customer OAll sidewalls must be in a rectangular angel. Max. tolerances are 1 cm! Warning: If the side or backside is freely accessible these areas must be safeguarded (safety fences, safety grids, marking etc.). Measures to be taken according to project. End parking spaces are generally more difficult to drive into. Therefore we recommended for end parking spaces our wider platforms. Parking on standard width platforms...

MultiBase U10 EB I Code number 588.52.620-001 I Version 03.2018 Page 1 Section Dimensions Car data Approach Page 2 Width dimensions Page 3 Approach Load plan OThe illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility. Page 6 Tec. data To be performed by the customer Upper platform with sheet metal plates usable platform width F1 F2 15 Upper platform with stone layer usable platform width F1 F2 O Units...

MultiBase U10 EB | Code number 588.52.620-001 | Version 03.2018 Circular drainage channel Width dimensions Floor drain Page 3 Approach Load plan Technical data Base plate To be performed by the customer Page 7 Base plate Base plate Base plate Electrical installation On-site coating of the uppermost platform Maximum weight of customer coating 250 kg/m2. Coating with asphalt or concrete Coating with paving stones or turf grids Paving stones or turf grids

Width dimensions Page 3 Approach Load plan Page 4 Pit MultiBase U10 EB | Code number 588.52.620-001 | Version 03.2018 Electrical installation Installation diagram Page 5 of 7 Electrical data (to be performed by the customer) Main fuse: 3 x fuse 20 A (slow) or circuit breaker 3 x 20 A (trigger characteristic K or C) Electricity meter Supply line (3 PH + N + PE) with marked wire and protective conductor: 2 5 x 2.5 mm Separate supply line (230 V) with lighting and power outlet Foundation earth connector from supply line into the shaft Empty pipe DN 40 with taut wire base pit to operating device...

Width dimensions Page 3 Approach Load plan Page 4 Pit Electrical installation Technical data To be performed by the customer Page 7 MultiBase U10 EB | Code number 588.52.620-001 | Version 03.2018 Technical data Sound insulation According to DIN 4109 (Sound insulation in buildings), para. 4, annotation 4, KLAUS Multiparkers are part of the building services (garage systems). Normal sound insulation: DIN 4109, para. 4, Sound insulation against noises from building services. Table 4 in para. 4.1 contains the permissible sound level values emitted from building services for personal living and working...

Width dimensions Page 3 Approach Load plan Page 4 Pit Electrical installation Technical data To be performed by the customer Page 7 MultiBase U10 EB | Code number 588.52.620-001 | Version 03.2018 Description Single platform (EB) General description: Multiparking system providing independent parking spaces for 1 car (EB). On special conditions the upper platform may be used as parking space. Dimensions are in accordance with the underlying dimensions of parking pit, height and width. The parking bays are accessed horinzotally (installation deviation ± 1 %). Vehicles are positioned on each parking...