MultiBase 2072i outdoor
8Pages

Tolerances for space 3 1’’ requirements + 0 [+ 0 ] Width dimensions Approach Load per parking space Cutting through Load plan Electrical installation Standard passenger cars: Limousine, Station Wagon, SUV, Van according to clearance and maximum surface load. Standard Special 1 190 cm [6‘-3‘‘] 3 190 cm [6‘-3‘‘] 3 see page 4 wheel load see page 4 Clearance profile 520 [17‘-1‘‘] for vehicle up to 5.00 m [16‘-5‘‘] long (540 [17‘-9‘‘] for vehicle up to 5.20 m [17‘-1‘‘] long) 10 Technical data Dimensions: cm [ft] Weights: kg [lbs] Forces: kN [lbf] Temperature: °C [°F] width weight EB (single platform) = 2 vehicles DB (double platform) = 4 vehicles Height dimensions Biggest type Special system: maximum load for extra charge. To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. Car width for platform width 230 cm [7’-7’’]. If wider platforms are used it is also possible to park wider cars. For dividing walls: cutting through 10 x 10 cm [4’’ x 4’’]. Potential equalization from foundation grounding connection to system (provided by the customer). Slope with drainage channel and sump. With direct connection to the sewerage system. Three-sided barrier compliant to DIN EN ISO 13857. In compliance with DIN EN 14010, 10 cm [4’’] wide yellow-black markings compliant to ISO 3864 must be applied by the customer to the edge of the pit in the entry area to mark the danger zone (see „load plan“ page 5). At the transition section between pit floor and walls no hollow mouldings/coves are possible. If hollow mouldings/coves are required, the systems must be designed smaller or the pits accordingly wider. For convenient use of your parking space and due to the fact that the cars keep becoming longer we recommend a pit length of 540 cm [17’-9’’]. MultiBase 2072i Outdoor installation | Code number 587.31.310-002 | Version 07.2018 Smallest type

MultiBase 2072i Outdoor installation | Code number 587.31.310-002 | Version 07.2018 Height dimensions Approach Load per parking space Load plan Car height lower level 160 [5‘-3‘‘] Car height lower level 155 [5‘-1‘‘] Car height lower level 150 [4‘-11‘‘] Width dimensions Page 2 Height dimensions Car height lower level 175 [5‘-9‘‘] Car height lower level 200 [6‘-7‘‘] Car height lower level 205 [6‘-9‘‘] Car height lower level 190 [6‘-3‘‘] Car height lower level 180 [5‘-11‘‘] Car height lower level 170 [5‘-7‘‘] Car height lower level 165 [5‘-5‘‘] Technical data Electrical installation

MultiBase 2072i Outdoor installation I Code number 587.31.310-002 I Version 07.2018 Page 1 Section Car data Page 4 Approach Load per parking space Page 5 Load plan Width dimensions Single Platform (EB) Page 6 Electrical installation Usable platform width Double Platform (DB) Page 8 To be performed by the customer Description Usable platform width OFor parking boxes on the edges and boxes with intermediate walls we recommend our maximum platform width of 270 cm [8'-10''] for single platforms and 540 cm [17'-9''] for double platforms. Problems may occur if smaller platform

Page 4 of 8 Page 1 Section Car data Approach Page 2 Height dimensions maximum ascending slope 10 % Page 4 Approach Load per parking space Page 5 Load plan OThe illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility. Load per parking space For countries where snow loads For countries where snow loads is are a crucial factor (weights in kg) no relevant factor (weights in kg) Page 8 To be performed by...

Page 2 Height dimensions Width dimensions Platform load in kg Platform load Load per parking space Load plan Electrical installation Platform load in lbs Platform load EB 4400 lbs Technical data Units are dowelled to the floor. Drilling depth: approx. 15 cm [6’’]. Floor and walls below the drive-in level are to be made of concrete (quality minimum C20/25)! The dimensions for the points of support are rounded values. If the exact position is required, please contact KLAUS Multiparking. Marking compliant to ISO 3864 (colors used in this illustration are not ISO 3864 compliant) All forces in...

MultiBase 2072i Outdoor installation I Code number 587.31.310-002 I Version 07.2018 Page 1 Section Car data Electrical installation Installation diagram Electrical data (to be performed by the customer) Page 2 Height dimensions Page 4 Approach Load per parking space Page 5 Load plan No. Qunatity Description Position Frequency 1 1 Electricity meter in the supply 3 x fuse 16 A (slow) in the supply 1 per (tr igger characteristic K or C) unit 3 x fuse 20 A (slow) in the supply 1 per (tr igger characteristic K or C) unit 2 x fuse 32 A (slow) in the...

Page 2 Height dimensions Page 3 Width dimensions Approach Load per parking space Load plan Electrical installation Technical data To be performed by the customer Description MultiBase 2072i Outdoor installation | Code number 587.31.310-002 | Version 07.2018 Technical data Operating device By default, the system can only be used for a fixed number of users. If different users use the system – only on the upper parking spaces – (e.g. short-time parkers in office buildings or hotels) the Multiparking system needs to be adjusted. If required, would you please contact us. The home and off position...

Page 2 Height dimensions Page 3 Width dimensions Approach Load per parking space Load plan Electrical installation Technical data To be performed by the customer Description MultiBase 2072i Outdoor installation | Code number 587.31.310-002 | Version 07.2018 To be performed by the customer Safety fences Constraints according to DIN EN ISO 13857 must be put in place on three sides (all except the entrance side), unless buildings border the pit. In compliance with DIN EN 14010, 10 cm [4’’] wide yellow-black markings compliant to ISO 3864 must be applied by the customer to the edge of the pit...