MultiBase 2042
7Pages

Load plan Electrical installation Water drainage Technical data Clearance profile Limousine (L) Clearance profile Station wagon (S) 530 for vehicle up to 5.00 m = 16’4’’ long (550 for vehicle up to 5.20 m = 17’ long) 11 To follow the minimum finished dimensions, make sure to consider the tolerances according to VOB, part C (DIN 18330 and 18331) and the DIN 18202. Car width for platform width 230 cm. If wider platforms are used it is also possible to park wider cars. Free space does not apply for station wagons on upper platform. If a higher ceiling height is available higher cars can be parked. L = Limousine / S = Station wagon For dividing walls: cutting through 10 x 10 cm. Potential equalization from foundation grounding connection to system (provided by the customer). In compliance with DIN EN 14010, 10 cm wide yellow-black markings compliant to ISO 3864 must be applied by the customer to the edge of the pit in the entry area to mark the danger zone (see „load plan“ page 4). Slope with drainage channel and sump. At the transition section between pit floor and walls no hollow mouldings/coves are possible. If hollow mouldings/coves are required, the systems must be designed smaller or the pits accordingly wider. For convenient use of your parking space and due to the fact that the cars keep becoming longer we recommend a pit length of 550 cm. Must be at least as high as the greatest car height + 5 cm. MultiBase 2042 | Code number 583.91.370-010 | Version 12.2016 width weight Standard passenger cars: Limousine, station wagon, SUV, van according to clearance and maximal surface load. S Free space Free space Page 3 Width dim. with door Function Headroom according to local regulations Width dim. without door All space requirements are minimum finished dimensions. 3 Tolerances for space requirements + 0 . Dimensions in cm. EB (single platform) = 2 vehicles DB (double platform) = 4 vehicles Garage without door (basement garage) Cutting through PRODUCT DATA

Dividing walls Width dim. without door Page 3 Width dim. with door Function Load plan Installation Electrical installation Technical data To be performed by the customer Description Single and Double Platform (EB + DB) – Example Carriageway in accordance with local regulations Single and Double Platform (EB + DB) – Example Carriageway in accordance with local regulations Single and Double Platform (EB + DB) – Example Width dimensions for garage without door (basement garage) MultiBase 2042 | Code number 583.91.370-010 | Version 12.2016 Carriageway in accordance with local regulations For...

Free space for roller shutter Page 3 Width dim. with door Function Load plan Installation Electrical installation Water drainage Dimensions A1, A2 and A3 must be coordinated with the door supplier (provided by the customer). Slope with drainage channel and sump. Seat-engaging surface (dimensions require coordination with door supplier.) Allround door dimensions require coordination between door supplier and local agency of KLAUS Multiparking. Technical data Carriageway in accordance with local regulations B8 30 30 30 30 30 For larger limousines and SUV wider driveways are necessary (in...

MultiBase 2042 | Code number 583.91.370-010 | Version 12.2016 Width dim. without door 300 maximum descending slope 2 % Page 3 Width dim. with door Function Approach Load plan Technical data Electrical installation Load plan maximum ascending slope 10 % The illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneouvring & positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility. 300 maximum ascending slope 2 % maximum descending slope 10 % Units are dowelled to the floor. Drilling...

MultiBase 2042 | Code number 583.91.370-010 | Version 12.2016 Installation data – Free space for longitudinal and vertical ducts (e.g. ventilation) 10 Free space for vertical pipelines, ventilation branch canals Width dim. without door Page 3 Width dim. with door Function Approach level Load plan Electrical installation DB Example for ventilation branch canal and/or vertical pipelines. Free space for horizontal ducting Technical data Free space only applicable if vehicle is parked forwards = FRONT FIRST and driver’s door on the left side. Electrical installation Installation diagram...

Width dim. without door Page 3 Width dim. with door Function Page 4 Load plan Installation Electrical installation Technical data To be performed by the customer Description MultiBase 2042 | Code number 583.91.370-010 | Version 12.2016 Technical data By default, the system can only be used for a fixed number of users. Units Low-noise power units mounted to rubber-bonded-to metal mountings are installed. Nevertheless we recommend that parking system’s garage be built separately from the dwelling. Available documents wall recess plans maintenance offer/contract declaration of conformity test...

Width dim. without door Page 3 Width dim. with door Function Page 4 Load plan Installation Electrical installation Technical data To be performed by the customer Description Safety fences Any constraints that may be necessary according to DIN EN ISO 13857 in order to provide protection for the park pits for pathways directly in front, next to or behind the unit. This is also valid during construction. Railings for the system are included in the series delivery when necessary. Numbering of parking spaces Consecutive numbering of parking spaces. Building services Any required lighting,...