HILINE CORROSION PROTECTION

Product catalog summary

System-Specific Corrosion Protection
The document outlines the corrosion protection measures for various components of KLAUS Multiparking systems. Key components such as platform base sections, cover plates, and extensions are hot galvanized according to DIN EN ISO 1461 with a layer thickness of approximately 45-55 µm. Special components may include additional coatings. Fastening screws are made of V4A stainless steel, while other steel components are shot-blasted and powder-coated.

General Information
KLAUS Multiparking systems comply with European safety guidelines and standards, including the Machinery Directive and DIN EN 14010. Corrosion protection follows DIN EN ISO 12944, specifically for corrosion category C3, which is suitable for moderate environments. The document emphasizes that the period of protection is not a warranty period but a guideline for maintenance, with coating durability rated as medium (5-15 years).

Coating System
The coating system is designed according to DIN EN ISO 12944-5 for corrosion category C3. The powder coating is tested to meet these standards, and galvanized surfaces comply with DIN ISO 1461 and DIN EN 13326.

Wear and Tear Minimization
To minimize damage to the corrosion protection coating, it is recommended to keep the pit dry, ensure sufficient ventilation, regularly clean driving surfaces, repair damages promptly, and prevent the introduction of salt-laden snow and ice.

Galvanized Platform Base Sections
The document advises regular washing of zinc surfaces, especially during winter, to prevent the build-up of zinc compounds. This maintenance helps form a protective patina, extending the life of the zinc layer.

Cleaning and Maintenance
KLAUS Multiparking offers cleaning and maintenance plans under their PLUS system service contract, detailed in a separate information sheet.

Claims for Defects
Warranty claims exclude wear and tear from usage, and specific claim periods are outlined in the company's offer.

Catalog excerpts

Code number 587.26.080-005 | Version 01.2016 | © KLAUS Multiparking | We reserve the right to make technical changes Page 1 of 4

Open the catalog to page 1

1. System-specific corrosion protection Platform base sections Side members Platform base sections, coverplates and poss. platform extensions: StandardGrip: Hot galvanized according to DIN EN ISO 1461, layer thickness approx ca. 45 µm. EasyWalk: Hot galvanized according to DIN EN ISO 1461, layer thickness approx ca. 45 µm. AluLongLife: Extruded aluminium section according to EN AW-6106 T6. Coverplates and poss. platform extensions: Aluminium AlMg3. Special components: We reserve the right to supply special components for a parking space, like, for example, cap types and stop plates for pit length...

Open the catalog to page 2

KLAUS Multiparking premium parking systems are subject to the European Parliament’s 2006/42/EG guidelines and the counsel of 17th May 2006 regarding machines (Machinery Directive) as well as DIN EN 14010 – safety of machines – equipment for power-driven parking of vehicles – Safety and EMW requirements regarding design, manufacture, assembly and activation. For the corrosion protection – described in detail below – DIN EN ISO 12944 applies. Individual components were assessed by us according to their functional and technical type and appropriate corrosion protection was specified. In accordance...

Open the catalog to page 3

Galvanized platform base sections: Please note the following points for galvanized surfaces: ■ When using the platform base sections as parking spaces on KLAUS Multiparking Parking Systems, the zinc surface is subject to the extremely aggressive influences of water mixed with melting agents (e.g. road salt), particularly in the winter months. This inevitably leads to the zinc reacting with the melting agent mixtures. ■ This results in white marks made up of various zinc compounds (zinc oxide, zinc hydroxides, zinc chloride, etc.), which, if not removed, become encrusted on the surface and are...

Open the catalog to page 4