video corpo

JOYA FN HYDRALIA

JOYA FN HYDRALIA

Product catalog summary
Product Description:
This document details a single-component, waterborne acrylic polymer waterproof coating designed for use in water tanks and similar applications. It is ready to use, forms a dense and tough film, and is resistant to water immersion and weathering. The coating adheres strongly to concrete and mortar substrates, making it suitable for long-term waterproofing and leak prevention projects.
Advantages:
  • Environmentally friendly, odorless, and safe for application.
  • Good crack resistance, accommodating minor substrate movement.
  • Resistant to water and long-term immersion; does not powder or peel.
  • High bond strength, forming an impermeable film for lasting waterproofing.
  • Simple application by roller or trowel without mixing.
Application Method:
  • Ensure the substrate is solid, smooth, clean, dry, and free from standing water, oil, and loose dust.
  • Stir the product thoroughly and apply directly by roller or trowel.
  • Apply 2 to 3 coats using a cross-hatch technique, allowing each coat to surface-dry before the next.
  • Total film thickness should be at least 1.5 mm; cure until fully hardened.
Coverage:
At a film thickness of 1.5 mm, coverage is approximately 2.0–2.5 kg/m², depending on substrate flatness.
Storage and Precautions:
  • Store sealed in a cool, dry, well-ventilated location, protected from sunlight, rain, and freezing. Shelf life is 12 months.
  • Apply at ambient temperatures between 5°C and 35°C; avoid application during rain or on damp substrates.
  • Use promptly after opening and reseal unused product to prevent skinning.
  • Do not add excessive water; if dilution is needed, add no more than 5% water.
Field of Application:
Suitable for waterproofing and leak prevention on concrete and mortar substrates of drinking water tanks, fire water tanks, landscape ponds, fish ponds, sewage tanks, basements, bathrooms, and roofs.
Health and Safety:
  • Conduct a water tightness test only after full curing, with a test duration of no less than 48 hours.
  • Avoid prolonged skin contact; rinse immediately with clean water if the product enters eyes or mouth.
Contact Information:
KINJOYA CORPORATION LIMITED
Phone: +86 13683660591
Email: [email protected]
Website: www.kinjoya.com
See more

Catalog excerpts

JOYA FN HYDRALIA-1

Waterproof Coating for Water Tanks This product is a single-component, waterborne acrylic polymer waterproof coating, ready to use straight from the container for convenient application. It forms a dense and tough film that is resistant to water immersion and weathering, with strong adhesion to concrete and mortar substrates. It is suitable for waterproofing and leak prevention in long-term immersion projects. • Apply at ambient temperatures between 5°C and 35°C. Do not apply during rain or when the substrate is damp. • Use promptly after opening; reseal any unused product to prevent skinning. • Do not add excessive water. If dilution is required, add no more than 5% water. • Conduct a water tightness test only after full curing, with a test duration of no less than 48 hours. • Avoid prolonged skin contact. If the product enters eyes or mouth, rinse immediately with clean water. COVERAGE: ADVANTAGES: • Single-component, waterborne, environ' mentally friendly, odorless, and safe for application. • Good crack resistance, accommodating minor substrate movement. At a film thickness of 1.5 mm, coverage is approximately 2.0-2.5 kg/m2 (actual consumption depends on substrate flatness). Store sealed in a cool, dry, well-ventilated location, protected from sunlight, rain, and freezing. Shelf life is 12 months under normal storage conditions. • Resistant to water and long-term immersion; does not powder or peel after prolonged soaking. • High bond strength; forms an impermeable film for lasting waterproofing performance. • Simple application; can be applied by roller or trowel without mixing. FIELD OF APPLICATION: APPLICATION METHOD: • The substrate must be solid, smooth, clean, dry, and free from standing water, oil, and loose dust. • Open the container, stir thoroughly, and apply directly by roller or trowel. • Generally apply 2 to 3 coats using a cross-hatch technique. • Allow each coat to become surface-dry before applying the next. • Total film thickness should not be less than 1.5 mm. After completion, cure until fully hardened. Suitable for waterproofing and leak prevention on concrete and mortar substrates of drinking water tanks, fire water tanks, landscape ponds, fish ponds, sewage tanks, basements, bathrooms, and roofs. KINJOYA CORPORATION LIMITED Complete information on health and safety data and other details available for download. PREMIUM WATERPROOFING SOLUTION

 Open the catalog to page 1

All KINJOYA CORPORATION LIMITED catalogs and technical brochures

  1. KIN PLUME DR

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About ArchiExpo
ArchiExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. ArchiExpo is an entity of VirtualExpo Group.