Insulated Panels UK & Ireland Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) Product Data Sheet

Product Data Sheet Product DataApplications Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) is designed to be integrated with the QuadCore® KS1000RW Roof Panel. The product is a co-extruded, multi-wall polycarbonate rooflight offering a U-value of 1.0 W/m2K. Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) is suitable for most building applications with a roof pitch of 4° or above after deflection. Note: Not suitable for application where the occupants or processes add significant quantities of water to the air, or where there are internal environments with low temperatures....

Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) Product Data Sheet MaterialsExternal Weather Face Multi-wall polycarbonate sheet 1,000 mm wide with an external trapezoidal profile. The external face has a coextruded UV protection. Factory-applied breather tape is applied to either end of the polycarbonate boxes to reduce the risk of condensation and prevent ingress of moisture and insects during transportation and delivery, keeping rooflights clean and optimising performance. Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) has two runs of PE foam tape, one at each side. Factory...

Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) Product Data Sheet Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) is stacked weather sheet to weather sheet (to minimise pack height). The top, bottom, sides and ends are protected by foam and timber packing and spiral wrap stretch polyfilm. To ensure that Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) remains in prime condition while stored on site, the following precautions should be taken. ■ Allocate a safe, trade-free area. ■ Prevent personnel from walking over packs. ■ All packs must be kept in packaging and...

Kingspan Day-Lite Trapezoidal Rooflight (KS1000 DLTR 1.0) Product Data Sheet Load / span tables - to be compared against calculated characteristic (i.e. unfactored) wind load values. Single Span Double Span 1 Values have been calculated in accordance with EAD 220089-00-0401, BS EN 16153:2013 and BS 5427: 2016. 2 Downwards pressure maximum deflection 1/30th of span, but not more than 50 mm. 3 Suction uplift maximum deflection V30th of span, but not more than 50 mm. 4 The actual wind suction load resisted by the rooflight is dependent on the number of fasteners used and the support thickness, as...

Contact DetailsUK Kingspan Limited Greenfield Business Park No. 2 Greenfield | Holywell | Flintshire North Wales | CH8 7GJ Kingspan Limited Carrickmacross Road | Kingscourt Co. Cavan | A82 E897 Please scan for the most up to date version of this document. For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading....