Access Flooring System MEETS EN13501 PARTS 1 & 2 FIRE RATING 26MM PANEL IDEAL FOR REFURBISHMENT SCREW DOWN SOLID UNDERFOOT These systems are fully tested to the requirements of the European Standard for raised access floors BSEN12825. The design incorporates a unique wrap around construction which makes panel removal and replacement easy whilst also improving panel edge strength. Its slim design of only 26mm also provides maximum usable void within the confines of a given floor height. The TL3 and TL5 panels are based upon a 600mm module constructed around a high performance chipboard core. The galvanised steel shell comprises a top sheet that is wrapped around and laminated to the core. This is then mechanically stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and static dispersion of the system where required. The panels are engineered to fine dimensional tolerances for modular control and corner locking to the pedestal head gives rock free solid stability.

Product performance (based upon a full Kingspan system) TL3 Working load with a safety factor of 3 Working load with a safety factor of 2 Uniformly distributed load* Airborne sound insulation Impact sound insulation Ultimate load * Does not form part of BSEN 12825. Panel Composition High density particle board Unique wrap around construction Construction Category Core material Panel construction Panel dimensions Screw down High density particle board Galvanised steel encapsulated particle board core Panel thickness (nominal) System weight (typical) Panel size • Tested in accordance with European...