Europed fully complies with the requirements of BSEN 12825 specification Alpha V Pedestal fully complies with light, medium & heavy grade requirements of the PSA MOB PF2 PS/SPU spec. Alpha III Pedestal fully complies with heavy and extra heavy grade requirements of the PSA MOB PF2 PS/SPU spec The pedestals are of a Zinc plated steel construction, ensuring electrical continuity, pre-assembled to help minimize installation time. The pedestals have a locking nut to ensure that once adjusted and locked there is no movement in the pedestal head. The head of the pedestals is designed to accept a range of support stringers. The head caps have a 90mm diameter and provide positive panel location. Adjustment is a nominal =/-40mm; less on the lower void heights, with the range of floor heights ranging from 50mm to 2000mm. When considering a pedestal, a height allowance must be made for cap thickness and adhesive layer; in general an allowance of 5mm should be made.

Stringer adds lateral stability See specific panel datasheet for more information • Where a stringer is recommended for system heights >450mm and >600mm the light clip on stringer is provided only to aid stability at installation; it is not a requirement to achieve system load rating. • For FDEB 38 the structural stringer must be employed at all heights. • For Extra Heavy rating the box stringer must be employed with the correct version of the Alpha 3 pedestal. • Where a requirement for zinc whisker free is specified nickel plated versions are available to special order. • For applications not...