FDEB BSEN Access Flooring System SAFE AND EASY ACCESS WIDE RANGE OF COVERING OPTIONS SOLID UNDERFOOT MEETS EN13501 PARTS 1 & 2 FIRE RATING This loose laid system is fully tested to the requirements of the European Standard for raised access floors BSEN12825. The design incorporates a full depth edge band which provides encapsulation of the chipboard core, this also provides protection to the edge of the surface finish. These panels are based upon a 600mm module constructed around a high performance chipboard core. The top and bottom surfaces are laminated with galvanised steel sheet. The panels are engineered to fine dimensional tolerances for modular control. The specified surface finish is then laminated to the top surface before being trimmed to fit flush with the panel sides. Electrical continuity and static dispersion is provided where required.

Product performance (based upon a full Kingspan system) FDEB 1 Ultimate load In excess of 4kN In excess of 9kN In excess of 12kN Working load with a safety factor of 3 Working load with a safety factor of 2 Uniformly distributed load* *Does not form part of BSEN 12825. Panel Composition Galvanised steel sheet Surface covering Chipboard core Construction Category Core material Panel construction Panel dimensions FDEB 1 Loose lay High density particle board Galvanised steel sheet, bottom or top & bottom with edge banding Panel thickness (nominal) System weight (typical) Panel size • Tested in accordance...