TECHNICAL DATA SHEET AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: KILZ ODORLESS® INTERIOR OIL-BASED PRIMER KILZ Odorless® primer Is a fast-drying stalnblocklng primer for use on most Interior surfaces. Its ultra low odor formula significantly reduces the lingering odors normally associated with oil-based products, making It Ideal to use In areas where higher odor levels are prohibitive. Any slight odor detected during the application of KILZ Odorless primer will dissipate soon after drying. Not recommended for mold- or mildew-prone surfaces or on flooring. Use on properly prepared Interior surfaces, such as Properly Prepared Glossy Surfacest FILL/MAX TINT "Tinting is not recommended for stainblocking Sheen levels depend on porosity and various surface Vehicle: Solution Acrylic The addition of colorants may add VOCs. COVERAGE RATE gallon, depending on the surface texture, porosity and application method. Does not Include the loss of material from spraying, RECOMMENDED FILM THICKNESS PREMIUM APPLICATION TOOLS Airless Spray: Rough / Porous Surfaces: 1/2" - 3/4" nap Brush: Nylon / Polyester Blend or Premium Natural Bristle SURFACE PREPARATION! •The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew and wallpaper paste. If washing Is necessary, use a non-soapy detergent or a TSP substitute. Rinse • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead Is • Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before prlmlng.f • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming. Note: KILZ® PREMIUM and KILZ 2® primers are recom- mended for mildew-prone surfaces. • Masonry, Brick, Stucco and Plaster: KILZ ODORLESS primer may be used on clean, dry aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ ODORLESS primer. • Fire Restoration: It Is critical to clean smoke damaged surfaces thoroughly before priming, •Apply as supplied using a brush, roller or sprayer. Any slight odor that Is detected during application will diminish quickly. • Stir thoroughly before and occasionally during • Prime the entire surface to ensure a uniform • Stalnblocklng: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoatlng the entire area. If bleeding continues, a longer dry time Is needed before topcoatlng. • Tinting: Not recommended for stalnblocklng applications. KILZ ODORLESS primer may be tinted with up to 2 ounces of universal colorant per gallon for non-stalnblocklng projects. Tinting to a lighter shade than the Application at lower temperatures, high humidity or poor ventilation will affect dry time. This information is provided "as is" and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-PRIMER-1.

TECHNICAL DATA SHEET KILZ ODORLESS® INTERIOR OIL-BASED PRIMER • Clean equipment and paint spatters with mineral spirits. • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with al current federal, state and local regulations. • Do not dispose of this product down a drain. • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY If this product is found to be defective upon inspection by its representative,...

AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: KILZ ODORLESS® INTERIOR AEROSOL PRIMER KILZ Odorless® primer Is a fast-drying stalnblocklng primer for use on most Interior surfaces. Its ultra low odor formula significantly reduces the lingering odors normally associated with oil-based products, making It Ideal to use In areas where higher odor levels are prohibitive. Any slight odor detected during the application of KILZ Odorless primer will dissipate soon after drying. Use on properly prepared Interior surfaces, such as • Painted Metal • Properly Prepared Glossy Surfacest Sheen levels depend...

TECHNICAL DATA SHEET KILZ ODORLESS® INTERIOR AEROSOL PRIMER • Clear spray valve Immediately after use by turning can upside down and spraying until only clear gas Is released, • If spray nozzle becomes clogged, remove and clean. Do not stick pins or wire Into can opening. • Replace nozzle with valve opening pointed away from you. • Clean fresh overspray with mineral spirits or paint thinner. Remove dried paint with paint remover, but test small area first to ensure paint remover does • Please consider donating any unused product. • For recycling or disposal Information, contact your local household...