TECHNICAL DATA SHEET AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: 'Produci may help projects qualify for LEED credits. Please see www.usgbc.org/LEED for additional details. KILZ MAX™ INTERIOR WATER-BASED PRIMER KILZ MAX™ Is a water-based primer, sealer and stalnblocker developed with new technology that's formulated to perform like an oil-based product. It tackles tough stains Including medium to heavy water damage, rust, smoke, nicotine, grease, tannin, Ink, pencil, felt marker, pet stains and more. KILZ MAX also seals pet and smoke odors. Topcoat with latex or oil-based paint. Use on properly prepared Interior surfaces, such as: • Brick • Ceramic Tile • Drywall • Glass • Masonry • Painted • Plaster • Stucco • Wood FILL/MAX TINT "Tinting is not recommended for stainblocking Sheen levels depend on porosity and various surface Vehicle: Epoxy Resin The addition of colorants may add VOCs. COVERAGE RATE gallon, depending on the surface texture, porosity and application method. Does not Include the loss of material from spraying, RECOMMENDED FILM THICKNESS PREMIUM APPLICATION TOOLS Airless Spray: Rough / Porous Surfaces: 1/2" - 3/4" nap Brush: Nylon/Polyester Blend Clean all tools before and after use. SURFACE PREPARATION! • The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew and wallpaper paste. If washing Is necessary, use a non-soapy detergent or a TSP substitute. Rinse • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead Is • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming. • Masonry, Brick, Stucco and Plaster: KILZ MAX primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ MAX primer. • Fire Restoration: It Is critical to clean smoke damaged surfaces thoroughly before priming, •Apply as supplied using a brush, roller or • Do not thin for stainblocking applica- tions. A small amount of water may be added for other spray applications. • Only apply If surface, air and product tempera- • Stir thoroughly before and occasionally during • Prime the entire surface to ensure a uniform • Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoatlng the entire area. If bleeding continues, a longer dry time Is needed before topcoatlng. •Sealing odors: For persistent odors, apply a second coat of primer before topcoatlng. If odor continues, a longer dry time Is needed before topcoatlng. • Tinting: Not recommended for stainblocking applications. KILZ MAX primer may be tinted with up to 2 ounces of universal colorant per gallon for non-stalnblocklng projects. Tinting to a lighter shade than the topcoat Is Application at lower temperatures, high humidity or poor ventilation will affect dry time. This information is provided "as is" and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-PRIMER-1.

\ TECHNICAL DATA SHEET KILZ MAX™ INTERIOR WATER-BASED PRIMER • Clean equipment and paint spatters with warm, soapy water. • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. • Do not dispose of this product down a drain, • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY If this product is found to be defective upon inspection by its representative,...