KILZ® MASONRY WATERPROOFING PAINT
2Pages

TECHNICAL DATA SHEET WATERPROOFING PAINT AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: KILZ® MASONRY WATERPROOFING PAINT KILZ® Masonry Waterproofing Paint Is Ideal for all Interior and exterior uncoated porous concrete and masonry surfaces Including basement and retaining walls, masonry walls, foundations, landscape walls and more. May be used on slightly damp surfaces. Do not use on surfaces painted with regular oil or latex based paint. Not for use on floors, Use on properly prepared Interior and exterior surfaces, such as: • Brick • Cinder Blocks • Masonry • Stucco • Concrete Blocks FILL/MAX TINT Sheen levels depend on porosity and various surface Vehicle: Styrene Acrylic The addition of colorants may add VOCs. COVERAGE RATE gallon, depending on the surface texture, porosity and application method. Does not Include the loss of material from spraying, RECOMMENDED FILM THICKNESS PREMIUM APPLICATION TOOLS Rough / Porous Surfaces: 3/4" nap Brush: Nylon / Polyester Blend (or other stiff synthetic filament brush) SURFACE PREPARATION! • New concrete must be completely cured (30 • Remove efflorescence, dirt, oil and grease. Clean with a concrete cleaner and degreaser, • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before painting. • Etch the masonry surface with a concrete etcher when efflorescence Is present. • Patch all cracks and holes with a fast-setting hydraulic cement. • Only apply If surface, air and product • Stir thoroughly before and occasionally during • IMPORTANT: If leaking Is still present after two coats, It Indicates that voids or pinholes are still open. Reapply product to these • Full Cure: 7-14 Days Application at lower temperatures, high humidity or poor ventilation will affect dry time. This information is provided "as is" and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-PRIMER-1.

TECHNICAL DATA SHEET KILZ® MASONRY WATERPROOFING PAINT WATERPROOFING PAINT • Clean equipment and paint spatters with warm, soapy water. • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. • Do not dispose of this product down a drain, • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY Masterchem Industries, LLC warrants customer...