AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: ' Applies only lo 350 VOC formula. 2 Applies to both formulas. FILL/MAX TINT "Tinting is not recommended for stainblocking Sheen levels depend on porosity and various surface Vehicle: Alkyd Resin Vehicle: Alkyd Resin The addition of colorants may add VOCs. COVERAGE RATE gallon, depending on the surface texture, KILZ COMPLETE® INTERIOR / EXTERIOR OIL-BASED PRIMER_ KILZ Complete® Is an oil-based primer, sealer and stalnblocker Ideal for blocking stains, priming, and sealing almost all Interior and exterior surfaces. It Is especially effective at blocking graffiti, tannin, water, smoke and other bleeding stains. KILZ Complete® dries quickly and provides a mildew resistant coating. It can be used under latex or oil-based paint. Not Use on properly prepared Interior surfaces, such as: • Brick • Drywall • Masonry • Painted Metal • Plaster • Properly Prepared Glossy Surfacest • Siding • Stucco • Wood porosity and application method. Does not Include the loss of material from spraying, RECOMMENDED FILM THICKNESS PREMIUM APPLICATION TOOLS Airless Spray: Rough / Porous Surfaces: 1/2" - 3/4" nap Brush: Nylon / Polyester Blend or Premium Natural Bristle SURFACE PREPARATION! • The surface must be clean, free of dust, grease, wax; peeling paint, mold, mildew and wallpaper paste. If washing Is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry. • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead Is hazardous.t • Unpalnted, exterior wood exposed to sun and/or moisture longer than 2 - 4 weeks must be cleaned and sanded before priming. • Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.t • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow • Masonry, Brick, Stucco and Plaster: KILZ COMPLETE primer may be used on clean, dry, aged masonry surfaces that have cured (dried) at least 90 days. If masonry has been cured less than 90 days, use KILZ® PREMIUM primer • Fire Restoration: It Is critical to clean smoke damaged surfaces thoroughly before priming. • Apply as supplied using a brush, roller or • Only apply If surface, air and product • Stir thoroughly before and occasionally • Prime the entire surface to ensure a uniform • Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoatlng the entire area. If bleeding continues, a longer dry time Is needed before topcoatlng. • Tinting: Not recommended for stainblocking applications. KILZ COMPLETE primer may be tinted with up to 2 ounces of universal colorant per gallon for non-stalnblocklng projects. Tinting to a lighter shade than the Application at lower temperatures, high humidity or poor ventilation will affect dry time. This information is provided "as is" and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-PRIMER-1.

TECHNICAL DATA SHEET KILZ COMPLETE® INTERIOR / EXTERIOR OIL-BASED PRIMER • Clean equipment and paint spatters with mineral spirits. • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with al current federal, state and local regulations. • Do not dispose of this product down a drain. • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY If this product is found to be defective upon inspection by...

AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: TECHNICAL DATA SHEET KILZ COMPLETE® INTERIOR / EXTERIOR AEROSOL PRIMER_ KILZ Complete® Interior / exterior aerosol primer provides a mildew resistant coating that blocks out most stains cause by water, smoke, tannin, Ink, pencil, felt marker, grease and graffiti, and seals pet and smoke odors. Use on properly prepared Interior and exterior surfaces, such as: • Brick • Drywall • Painted Metal • Paneling Properly Prepared Glossy Surfacest Sheen levels depend on porosity and various surface Vehicle: Modified Alkyd COVERAGE RATE container, depending on...

TECHNICAL DATA SHEET KILZ COMPLETE® INTERIOR / EXTERIOR AEROSOL PRIMER • Do not stick pins or wire into can opening. • Clean fresh overspray with mineral spirits or paint thinner. Remove dried paint with paint remover, but test small area first to ensure paint remover does • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option, either furnish an equivalent amount of...