Clean Start AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: "Product may help projects quality for LEED credits. Please see www.usgbc.org/LEED for additional details. TECHNICAL DATA SHEET KILZ CLEAN START® ZERO VOC* INTERIOR / EXTERIOR WATER-BASED PRIMER_ KILZ Clean Start® Is a zero VOC*, low odor primer, sealer and stalnblocker. This fast drying, water-based formula seals, primes and blocks out most light stains Including water, rust, grease, Ink, pencil and felt marker, and can be topcoated with latex or oil-based paint. For use on most Interior and exterior surfaces. Not recommended on flooring. "Formulated without the addition of VOC containing solvent. Raw materials may contribute negligible amounts of VOC. VOC < 5 g/L, excluding colorant(s). Use on properly prepared Interior and exterior surfaces, such as: • Brick • Drywall • Painted Metal • Paneling Properly Prepared Glossy Surfacest FILL/MAX TINT "'Tinting is not recommended for stainblocking Sheen levels depend on porosity and various surface Vehicle: Acrylic Polymer The addition of colorants may add VOCs. COVERAGE RATE gallon, depending on the surface texture, porosity and application method. Does not Include the loss of material from spraying, RECOMMENDED FILM THICKNESS PREMIUM APPLICATION TOOLS Airless Spray: Rough / Porous Surfaces: 1/2" - 3/4" nap Brush: Nylon / Polyester Blend SURFACE PREPARATION! •The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew and wallpaper paste. If washing Is necessary, use a non-soapy detergent or a TSP substitute. Rinse • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead Is • Unpalnted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming. • Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before prlmlng.f • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming. • Masonry, Brick, Stucco and Plaster: KILZ CLEAN START primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ CLEAN START primer. • Fire Restoration: It Is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ COMPLETE®, KILZ ODORLESS® or KILZ® ORIGINAL primers, •Apply as supplied using a brush, roller or • Do not thin for stainblocking applications. A small amount of water may be added for other spray applications. • Only apply If surface, air and product tempera- • Stir thoroughly before and occasionally during • Prime the entire surface to ensure a uniform • Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoatlng the entire area. If bleeding continues, a longer dry time Is needed before topcoatlng. • Tinting: Not recommended for stainblocking applications. KILZ CLEAN START primer may be tinted with up to 2 ounces of universal colorant per gallon for non-stalnblocklng projects. Tinting to a lighter shade than the topcoat Is recom- Application at lower temperatures, high humidity or poor ventilation will affect dry time. Clean Start This information is provided "as is" and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-PRIMER-1.

Clean Start TECHNICAL DATA SHEET KILZ CLEAN START® ZERO VOC* INTERIOR / EXTERIOR WATER-BASED PRIMER • Clean equipment and paint spatters with warm, soapy water. • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. • Do not dispose of this product down a drain, • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY If this product is found to be...