TECHNICAL DATA SHEET CEILING PAINT STAINBLOCKING PAINT & PRIMER AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH: "Product may help projects quality for LEED credits. Please see www.usgbc.org/LEED for additional details. KILZ® CEILING PAINT KILZ® Celling Paint Is a low odor, zero VOC* primer and topcoat that has KILZ® Premium stalnblocklng technology. It blocks out most common celling stains and rolls on easily with minimal spattering. Dries quickly to flat white. 'Formulated without the addition of VOC containing solvent. Raw materials may contribute negligible amounts of Use on properly prepared Interior surfaces, such as: • Brick • Drywal • Painted Metal • Paneling Properly Prepared Glossy Surfacest FILL/MAX TINT "'Tinting is not recommended for stainblocking Sheen levels depend on porosity and various surface Vehicle: Acrylic Copolymer The addition of colorants may add VOCs. COVERAGE RATE gallon, depending on the surface texture, porosity and application method. Does not Include the loss of material from spraying, RECOMMENDED FILM THICKNESS PREMIUM APPLICATION TOOLS Airless Spray: Rough / Porous Surfaces: 1/2" - 3/4" nap Brush: Nylon/Polyester Blend SURFACE PREPARATION! •The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew and wallpaper paste. If washing Is necessary, use a non-soapy detergent or a TSP substitute. Rinse • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead Is • Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before prlmlng.f • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before painting. • Masonry, Brick, Stucco (Popcorn Ceilings) and Plaster: KILZ CEILING PAINT may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ CEILING PAINT • Fire Restoration: It Is critical to clean smoke damaged surfaces thoroughly before painting. Prime smoke damaged surfaces with an oil-based primer before painting. Primary Recommendation: KILZ COMPLETE®, KILZ ODORLESS® or KILZ® ORIGINAL primers, •Apply as supplied using a brush, roller or • Do not thin for stalnblocklng applications. A small amount of water may be added for other spray applications. • Only apply If surface, air and product • Stir thoroughly before and occasionally • Stalnblocklng: Multiple coats may be required for complete stalnblocklng and • Tinting: Not recommended for stalnblocklng applications. KILZ CEILING PAINT may be tinted with up to 2 ounces of universal colorant per gallon for non-stalnblocklng • To Recoat / Topcoat: 2 Hours; 4 Hours for maximum stalnblocklng Application at lower temperatures, high humidity or poor ventilation will affect dry time. CEILING PAINT This information is provided "as is" and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-PRIMER-1.

TECHNICAL DATA SHEET KILZ® CEILING PAINT CEILING PAINT STAINBLOCKING PAINT & PRIMER • Clean equipment and paint spatters with warm, soapy water. • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. • Do not dispose of this product down a drain, • Please consider donating any unused product. • For recycling or disposal Information, contact your local household refuse collection service, LIMITED WARRANTY If this product is found to be defective upon...