KEY CHIP-100 DESCRIPTION KEY CHIP-100 is a 100% solids, decorative, seamless, low maintenance, resinous flooring system consisting of a polymer resin primer coat, polymer resin base coat broadcasted with colored vinyl chips (flake), and a clear polymer resin sealer. The installed system reduces porosity and produces a dense, sanitary finish that minimizes bacterial growth and chemical penetration. The finish can be made non-slip resistant as required for wet areas. An integral cove base can be installed in areas requiring seamless wall to floor coatings. For chemical resistant applications, specify KEY CHIP-100-HP. Seamless, Sanitary Floor Excellent Wear and Abrasion Resistance Low Maintenance Zero VOC, Low Odor, Can Be Applied in Occupied Facilities Safe (Non-Skid) with Optional Non-Skid Additive Chemical Resistant and UV Light Resistant Finishes are Available Decorative Appearance Meets USGBC LEED Criteria On or below grade installation must have an efficient 10-15 mil thick vapor barrier under the slab. Special treatments are necessary where hydrostatic pressure or excessive moisture may be present. Refer to Key Resin Technical Bulletin #1 for testing requirements. Substrate temperature must be a minimum of 55°F (Low temperature cure system available on request). Substrate must be free of dirt, waxes, curing agents, and other foreign materials. All control joints, cold joints and expansion joints in the substrate should be revealed through the floor system. It is optional to cover filled control joints (saw cuts) with the flooring material, but stress lines or cracks may occur if movement is significant. Refer to Key Lastic Chip 100 if a system designed around a flexible crack-isolation membrane is preferred. TYPICAL USES KEY CHIP-100 is an ideal system for use in light to medium traffic areas such as class rooms, corridors, lobbies, restrooms/lockers, cafeterias, laboratories, light manufacturing areas, residential garages, and numerous other areas requiring a chemical resistant, sanitary, wear resistant and decorative finish. Numerous other applications may be suitable, consult with Key Resin to review your specific project requirements.

TECHNICAL DATA System Performance Properties Flammability ASTM D-635 Fungus & Bacteria Growth MIL-F-52505 §4.4.2.11 Hardness ASTM D-2240 Bond Strength to Concrete ACI COMM #403, Bulletin 59-43 Resistance to Elevated Temperature MIL-D-3134F §4.7.4 Coefficient of Friction ASTM C-1028 Self Extinguishing Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests. 70-75 Shore D 300-400 psi (100% concrete failure) Varies by tensile strength of concrete No slip or flow at required temperature of 158°F 0.70-80 Average Varies by applied finish texture, sealer type Nil Passes...

Installation of KEY CHIP-100 involves several steps including priming, applying a base coat(s), broadcasting colored chips, grouting, and sealing. For specific installation guidelines consult Key Resin Company’s Installation Instruction Document. MAINTENANCE After completing the application of KEY CHIP-100, the installer should provide the owner with maintenance instructions. If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly. KEY CHIP-100 is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces...