Maintenance of Kestrel PVC-UE & PVC-U Products

Product catalog summary

Introduction
This technical bulletin provides guidance on maintaining Kestrel's PVC-UE and PVC-U installations. These products require minimal maintenance and can retain their appearance for years with proper care.

Specifications and Standards
The products comply with BS 7619 standards and are registered recyclers under licenses KM606759, BES 605713, EMS 605712, and FM 605711.

Maintenance Recommendations
To maintain the appearance of PVC installations, regular cleaning with warm soapy water is recommended to remove surface dirt. The frequency of cleaning depends on local environmental conditions. It is crucial to:

Use copious amounts of soapy water to prevent scratching.
Always use a soft cloth or sponge for wiping.
Avoid solvent-based and abrasive cleaners.

Repairs and Remedial Work
If a profile is damaged, it is advised to remove and replace the damaged section to maintain product performance.

Contact Information
For further assistance, contact Kestrel at Billet Lane, Normanby Enterprise Park, Scunthorpe, North Lincolnshire, DN15 9YH. Phone: (01724) 400440, Fax: (01724) 280241, Email: [email protected].

Catalog excerpts

Maintenance of Kestrel PVC-UE & PVC-U Products-1

Technical Bulletin Maintenance of Kestrel PVC-UE & PVC-U Products This technical bulletin will guide you through Kestrel's recommended method of maintaining your PVC-UE and PVC-U installation. These products are low maintenance and with the required care and attention will stay looking good for years to come. However, there are some external factors which may adversely aﬀect the appearance of any PVC, especially after extended weathering: • Solvent based cleaners • Abrasive cleaners • Environmental contamination e.g. dirt / pollen Hence in order to maintain the appearance, it will be necessary to wash the installation with warm soap and water to remove surface dirt. The frequency of this will depend upon the local environmental conditions. This cleaning should be carried out with copious amounts of soapy water to avoid any chance of scratching of the surface. When wiping over ALWAYS use a soft cloth or sponge. NEVER use solvent-based cleaners. NEVER use abrasive cleaners. Repairs and Remedial Work In the event of a proﬁle becoming damaged in service it is recommended that the damaged proﬁle is removed and replaced to ensure full product performance. REGISTERED RECYCLER www.kbp.co.uk Billet Lane, Normanby Enterprise Park, Normanby Road, Scunthorpe, North Lincolnshire, DN15 9YH Tel: (01724) 400440 Fax: (01724) 280241 Email: info@kestrel

Open the catalog to page 1

All KESTREL / BCE catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list