Grease separators for free-standing installation Euro Standard (D) NS 15 - 30 Illustration Article description NS Article # Certification: Z-54.1-473 Delivery: System completely assembled. Accessories: Inspection window and refill inlet, Sampling chamber, lifting station. Upgradable to PV+S Auto Mix & Pump, see page 275 Grease separator Euro Standard (D) NS ... □ with direct disposal according to Euro Norm EN 1825 and DIN 4040, non-recycled polyethylene For free-standing installation in frost-protected areas, with integrated sludge trap and sloped surfaces for fast and clean disposal, with two domed covers made of polymer, with quick-release closures, sealed odour-tight, with suction device installed for the joint disposal of contents of sludge trap and grease separator chamber, intake pipe 75 mm OD PN 10 in accordance with DIN 2501, Storz-B coupling R 2 1/2 for connection to the disposal vehicle. Inlet and outlet 0 200 mm for the connection to PE-HD pipes according to DIN 19537, HT pipes according to DIN 19560, PP or AS. Model type: Right, can be changed to the left-hand model type by replacing the inlet and outlet connecting pipes. Technical note see page 283 Nominal size 0 a Installation dimensions l x b without SonicControl 0 = Outer diameter b1 = Set-up dimensions Total Grease (including water) 600 l 2600l