Catalogs >
KESSEL >
Euro Auto Mix (D+SP )

Euro Auto Mix (D+SP )
1 / 1Pages

Catalog excerpts

Grease separators for free-standing installation Euro Auto Mix (D+SP) NS 15 - 30 Illustration Article description NS Article # Illustration shows nominal sizes NS 20 - 30 (NS 15 with single pump) Certification: Z-54.1-473 Delivery: System completely assembled. Accessories: Sampling chamber, lifting station, Remote control system, Telecontrol Grease separator Euro Auto Mix (D+SP) NS ... □ with direct disposal and Shredder-Mix-System, according to Euro Norm EN 1825 and DIN 4040, non-recycled polyethylene, pumping capacity 3.0 kW. 5 m cable length For free-standing installation in frost-protected areas, with integrated sludge trap and sloped surfaces for fast and clean disposal, with two domed covers made of polymer, with quick-release closures, sealed odour-tight, with suction device installed for the joint disposal of contents of sludge trap and grease separator chamber, intake pipe 75 mm OD PN 10 in accordance with DIN 2501, Storz-B coupling R 2 1/2 for connection to the disposal vehicle. KESSEL Shredder-Mix-System with mixing and rinsing via jet and conic nozzles, external pump(s), with integrated chopping mechanism and closure valve, cable length 5m, control unit for actuating the pump(s) and the solenoid valves, refill inlet in accordance with DIN 1988, R 1 connection. 2 solenoid valves 1“, viewing window with wiper, viewing window with wiper. Inlet and outlet 0 200 mm for the connection to PE-HD pipes according to DIN 19537, HT pipes according to DIN 19560, PP or AS. Model type: Right, can be changed to the left-hand model type by replacing the inlet and outlet connecting pipes. Technical note see page 283 Nominal size 0 a without SonicControl 0 = Outer diameter b1 = Set-up dimensions Total Grease (including water) 600 l 2600l

Open the catalog to page 1