Versatile lightweight concept - Underfloor heating, above all for renovations.

x-net C13 dry system. Underfloor heating for dry screed elements and wet screed. Versatile lightweight concept – perfect for renovation and modernisation. In combination with dry screed elements, the x-net C13 dry system (tubes in the insulating layer) permits especially lightweight floor construction that, in addition, requires minimal time to complete. With wet screeds as well, a lower construction height and weight per unit area can be achieved than with classic wet systems (tubes in the screed). The new, professional detailed solutions for the tube layout in the distributor connection area...

x-net C13 benefits When used with dry screed elements W Short reaction time W Ideal for renovations W Low weight W No introduction of moisture W Low construction height When used with wet screeds W Heating and cooling W Lower weight than with classic underfloor heating systems W Low construction height Low height of the x-net dry flooring panel (25 mm) W High load-bearing capacity of the surface thanks to closed structure W Three transverse tube channels for connecting lines in the head region W Easy installation: 1. Polystyrene rigid foam insulation can be cut easily with the x-net cutting tool...

x-net dry flooring panel (25 mm). High load-bearing capacity, easy to install. System panel for use with dry screed elements and wet screed. Easy installation thanks to low height and light weight. The three transverse tube channels in the head allow the installation of two heating circuits in a room without having to create additional tube channels. Additional tube channels needed can be cut precisely and quickly with the x-net hot cutting tool. To facilitate the correct positioning of the x-net heat-conducting panel, there are markings on the x-net dry flooring panel (25 mm). The x-net dry...

x-net distributor panel (25 mm). Innovative in every detail. More reliable floor construction based on professional detailed solution for flexible tube layout in the distributor connection area. Printed fan-out grid Tube channels made quickly W Secure tube retention W No unnecessary hollow spots W Reduced surface temperature despite close tube spacing W Cut tube channels precisely and quickly with the x-net hot cutting tool with the specially developed x-net Omega cutting tip. For secure tube retention with an especially high tube holding force. Omega-shaped tube channel cut on-site for secure...

Fast-responding and uniform heat distribution. Multifunctional and easy to install. x-net heat-conducting panel made of steel or aluminium. For efficient heat distribution. Adjustable length, easy fitting and no tools required. Special Ω-shaped contour for high tube holding force and optimal heat conduction from the tube into the floor structure above. Kermi x-net C13 dry system Tools-free length adjustment of the x-net heat-conducting panels through simple, burr-free breaking at the pre-stamped break points. The heat-conducting panel can be broken into three, different sized individual panels...

The x-net heat-conducting panel made of aluminium provides a considerable increase in heat output. Compared to the steel version, the heat output is up to 30 % higher at the same flow temperature. Conversely, the flow temperature can be reduced by approx. 3K for the same heat output – this translates into an energy savings of about 7 % when operated with a heat pump. Tools-free separation Burr-free breaks W Additional surface stabilization W High tube holding force thanks to Omega-shaped contour W x-ne t mad heat-co n e of stee ducting l pan x-ne mad t heat-c o e of alum nductin g pa iniu m nel...

x-net 5-layer-PE-Xc tube. Conveniently packed, clearly labelled, technologically unrivalled. Printing on piping indicates remaining length and tube length already used for optimum usage of the piping bundles. High flexibility permits tight bending radii and minimises the restoring force in the tube elbow. Tubes and tube connectors according to DIN 4726 and DIN EN ISO 15875 are checked and regularly monitored by an accredited independent testing institute. Practical piping bundle lengths up to 240 m in special cartons to roll out with the x-net unrolling equipment right out of the packaging. Large...

Protective layer Priming Oxygen barrier layer Priming PE-Xc base tubing Twist-free unrolling right out of the packaging W Remaining tube remains wellprotected in the packaging, ready to be transported at any time W Printing on piping indicates remaining length and tube length already used W Tubes and tube connections inspected and regularly monitored by third parties W 5-layer technology with protected internal oxygen barrier layer W Oxygen diffusion resistant according to DIN 4726 W Practical piping bundle lengths from 120 to 1000 m

x-net edge insulating strips - H 120 mm. The perfect termination at the wall − glued quickly and without tools at the desired height. Time-saving and optimal attachment to the wall through use of adhesive strip on the back W Extra-long film flaps for reliable sealing, even in difficult areas such as outside corners or in front of distributor cabinets W Optimal protection of the edge joint against ingress of screed. This prevents sound bridges and assures unhindered expansion of the hot screed W Fast and easy shortening through tear-off slit Adhesive strips for fixing the x-net edge insulating...

x-net unwinding unit. For tension- and twist-free unrolling of the x-net tube system tubes from the packaging. Solid components, manufactured with high precision and designed for longevity – inherent in every Kermi-designed product. Installed and ready for laying of tubing in just a few simple steps without the need for tools. With simple transport of the x-net unrolling equipment in a backpack. Any remaining tubing remains in the cardboard box, protected against dirt and damage and ready to be transported at any time. Innovation made by Kermi Easy transport in a backpack W Simple, tool-free...