CLASSIC CONVECTOR RADIATOR
1 / 2Pages

C O N C E P T C O M PAC T R A D I AT O R Bracket suspension and wall bracket kit supplied as standard Colour finish upon request Before leaving the factory each radiator is individually tested. Operating pressure 10 bar Conversion factors for other temperatures Correction factors U f for heat outputs at ΔT's other than 50 K ΔT K The system should be designed to follow the recommendations of BS 5449 or BS 6880 as appropriate, with particular care taken to avoid air entry or water discharge through an open vent. The installation work must be done in accordance with recognised good practice and precautions taken to avoid contamination which could lead to corrosion. If a corrosion inhibitor or other water treatment is to be used, the manufacturer's instructions must be strictly followed. Each radiator is individually tested for leaks. Test pressure: 13.0 bar Operating pressure: 10.0 bar Specials upon request Certified to DIN EN ISO 9001:2008 Heat outputs based on 75/65° C (70° C mean) Delta T 50° C Description Type 11-33: Kermi concept flat convector radiators with absolutely flat front, no all-around beads, made from steel plate in accordance with EN 442. Rear and interior profiled, bead division 33.3 mm. Overlapping factory fitted top grille and end panels. Scope of delivery Kermi concept radiators are primed and powder coated. Including protective packaging and assembly kit, comprising wall brackets, plastic bracket inserts as well as blanking and air vent plugs. Quality Water treatment On completion of the installation, the system must be properly flushed and filled in accordance with the British Standard Code of Practice for the Treatment of Water in Domestic Hot Water Central Heating Systems BS 7593. This will help remove flux residues and general installation debris, which might promote corrosion and damage within the system. Corrosion inhibitor must be applied to maximise the working life of the system, its application must be in accordance with the appropriate manufacturer's instructions and must be suitable for the particular metals within the system. Further details of suitable, readily available cleansers and inhibitors can be obtained from: Sentinel Division, Betz Dearborn Limited, Foundry Lane, Widnes - Cheshire WA8 8UD, Telephone: (0151) - 420 9595 Alpha-Fry Technologies Europe, Tandem House Marlowe Way, Beddington Farm Road, Croyden - Surrey CRO 4XS, Telephone: (01799) - 550 811 Failure to take these necessary precautions may cancel our product guarantee. Technical data for Kermi concept radiators Thickness of steel-plates Radiators 1.25 mm / front panel 1.0 mm Heat emission Controlling pressure Operating pressure Gloss paint finish Kermi reserves the right to alter technical specifications and prices without prior notice in accordance with their product design policy and in keeping with market requirements. E&OE. Mounting The radiator is mounted from the rear using 4 anchor brackets (6 from BL = 1800 mm). The radiator can be aligned horizontally. Finish Kermi radiators come with a highgloss two-coat powder-coating process. They are degreased, iron phosphated, primed with electric dip-coating (ETL) and electro-static powdercoated (EPS), in accordance with DIN 55900-FWA. Emission-free and environmentally friendly paintwork. Even coating without drips. Colour: Kermi-white (RAL 9016) Example Correction to the approved outputs at ΔT 50K actual temperature difference ΔT for radiator 987 watts output at ΔT = 50K: A flow temperature of 70° C and return temperature of 55° C, room 18° C gives a ΔT= 45K (see table ) Correction factor U f = 0.871(see table above) Actual heat output: 0.871 x 987 = 860 watts. Heat output CONCEPT COMPACT RADIATOR Heat outputs tested to EN 442, relating to a water temperature of 75°/65° C and a room temperature of 20 ° C. Test results for each model are available on request for Delta T 60° C. SUPERIOR BUILD QUALITY Packaging Packed ready for assembly in cardboard and vacuum packed in film. The packaging does not need to be removed for assembly. DESIGN EXCELLENCE HIGH HEAT OUTPUT Connections 4 x interior threads G 1/2“ 05 PRICE LIST Certified to DIN EN ISO 9001:2008 DIN EN ISO 14001:2004 (European Quality Standard) Certified to DIN EN ISO 9001:2008. The construction design of the concept compact radiators corresponds to the former BAGUV guidelines. Water content of radiators (Litres per 100 mm length) Dealer: (name, address) Kermi (U.K.) Ltd. 7, Brunel Road Earlstrees Industrial Estate Corby, Northants NN17 4JW Telephone 015 36 40 00 04 Telefax 015 36 44 66 14 info@kermi.co.uk www.kermi.co.uk

Watt/m 75/65/20° C Length mms Baulänge mm 405 Watts Btu Price 505 Watts Btu Price 605 Watts Btu Price 705 Watts Btu Price 805 Watts Btu Price 905 Watts Btu Price 1005 Watts Btu Price 1205 Watts Btu Price 1405 Watts Btu Price 1605 Watts Btu Price 1805 Watts Btu Price 2005 Watts Btu Price 2305 Watts Btu Price 2605 Watts Btu Price 3005 Watts Btu Price single panel with convector depth 63 mm, Art.-No. PK011… 405 505 605 double panel with convector depth 66 mm, Art.-No. PK012… 505 605 Sample Order triple panel with 3 convectors depth 157 mm, Art.-No. PK033… 305 405 505 605 Accessories for...